Digital Optical Fibre Toslink Coaxial to Analogue Converter 5.1-Channel Rotary Knob - Digital To Analog Audio HiFi Headphone Amplifier 3.5mm Female Port

Feature:

1. This DAC converter can convert coaxial or digital audio signals into analog L/R audio and can be connected to external equipment such as amplifiers via standard type connectors.

2. The bi-directional design makes it more than a DAC converter, it not only supports digital to analog conversion, but also supports Toslink to coaxial and coaxial to Toslink.

3. The built-in hi-fi amplifier chip, L/R and 3.5mm output can control earphone/impedance sound from 16~150Ω, and the volume control knob is only used to adjust the volume of the headphone jack and jack.

4. Equipped with 4.0OD optical cable, coaxial cable and power adapter, no need to install additional programs, just plug and play, set audio output to PCM or LPCM.

5. You can adjust the volume of the audio output from the L/R+3.5mm connector and supports sampling rates of 32, 44.1, 48, 96 and 192 KHz, as well as 24-bit S/PDIF input bits. broadcasts on the left and right channels.

Specification:

Item Type: Digital to Analog Fiber Converter

Input interface: Coaxial or for Toslink digital audio

Output Interface: L/R, Headset, Coaxial, for Toslink

Frequency range: 10Hz-48KHz

Output impedance: 16-300Ω

Operating voltage: 5V

Packing List:

1 x Converter
1 x USB line
1 x Fiber Optic Cable
1 x Manual

Note:

1. This converter does not support 5.1 channels, such as and DTS.

2. It does not have an optical output interface for pro/slim, so this converter cannot be used.

3. This converter supports digital to analog conversion, but does not support analog to digital conversion.