Digital Stepper Motor Driver 2 Phase 16 Subdivisions 16 Curr

Description:
1. Multi Usage: Suitable for 86 flange 4 wire, 6 wire, 8 wire two phase stepping motor. Built in PI control algorithm, with low noise, vibration and heat. Support single end, pulse and direction, dual pulse signal input.
2. 16 Options: There are 16 kinds of subdivision, 16 kinds of current for selection, the default maximum subdivision is 128, and the output current is up to 8.2A, which will be halved after 1s of standstill.
3. Direct Input: Pulse, direction and enable terminal have constant current input function, can directly connect input signal without additional series resistance for voltage reduction and current limited protection.
4. Safety Protection: With the functions of overvoltage and undervoltage alarm, phase current overcurrent protection, motor phase open circuit detection, etc.
5. Wide Voltage Range: Support AC20 to 110V, DC20V to 160V power supply, Description optical isolation differential signal input, with maximum input pulse frequency of 300KHz.


Specifications:
Item Type: Digital Stepper Motor Driver
Material: ABS
Description
Minimum Value
Typical Value
Maximum Value
Unit
Output Current (Peak Value)
2.2
-
8.2
A
Supply Voltage
20
80
110
VAC
20
90
160
VDC
Control Signal Current
5
10
20
mA
Step Pulse Frequency
0
-
300
KHz
Step Pulse Width
2
-
-
us
Direction Signal Width
100
-
-
us
Undervoltage Protection Point
-
7.5
-
VDC
Overvoltage Protection Point
-
170
-
VDC
Drive Initialization Time
2
-
-
S
Insulation Resistance
500
ΜΩ
.


Package list::
1 x Digital Stepper Motor Driver
Note:
1. The AC input voltage shall not exceed AC110V.2. DC input voltage shall not exceed DC160V.3. The green indicator PWR lights up when the drive is powered on.