This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeTools & Home ImprovementPower & Hand ToolsPower Tool Parts & AccessoriesJig AccessoriesDigital Voltmeter Ammeter DC 100V 200V 50A100A Voltage Current Meter Tester LED Display
/product/52/0487182/1.jpg?9814)
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 467
Ready for pickup between 29 May and 31 May if you place your order within the next 2hrs 17mins
Door Delivery
Delivery Fees KSh 577
Ready for delivery between 29 May and 31 May if you place your order within the next 2hrs 17mins
Return Policy
Easy Return, Quick Refund.Details
Seller Information
Happy breaking up
New Seller
1 Followers
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This module is made of two high-quality LED Nixie tube with high brightness and can display current and voltage at the same time
2.This module uses an imported microcontroller and performs a large amount of data processing on the software, ensuring accurate and stable display
3.This module has exquisite craftsmanship and an ultra small volume
4.This module has reverse connection protection, even if it is reversed, it will not damage the module
5.This module can be used for monitoring the current and voltage of automotive and electric vehicle batteries
Parameters:
Module Name: Current and Voltage Display Module
Measurement range: 10A/50A/100A (current)
Working current: less than 10MA
Storage temperature: -10 ℃ to+65 ℃
Measurement accuracy: 0.1%
Display mode: double four digit 0.28 Nixie tube
Measurement range: 0V-100V (voltage), minimum display 0.1V
The ground wire of the power supply end and the measuring end of the Ammeter adopts a common ground design, that is, the ground wire of the power supply is connected to the ground wire of the test end, so the test end of the Ammeter can only be connected behind the consumer (that is, between the negative pole of the equipment under test and the negative pole of the equipment under test)
1. It is recommended to use separate isolated power supply at the power supply end of the meter head
2. Before use, the shunt must be connected to the circuit first, and then connected to the digital current meter head to prevent the meter head from being damaged by high voltage
Note: 50A/100A requires a shunt to measure current
Package include:
Voltmeter Ammeter X1
Connecting wire X2
Origin : Mainland China
Certification : none
Features:
1.This module is made of two high-quality LED Nixie tube with high brightness and can display current and voltage at the same time
2.This module uses an imported microcontroller and performs a large amount of data processing on the software, ensuring accurate and stable display
3.This module has exquisite craftsmanship and an ultra small volume
4.This module has reverse connection protection, even if it is reversed, it will not damage the module
5.This module can be used for monitoring the current and voltage of automotive and electric vehicle batteries
Parameters:
Module Name: Current and Voltage Display Module
Measurement range: 10A/50A/100A (current)
Working current: less than 10MA
Storage temperature: -10 ℃ to+65 ℃
Measurement accuracy: 0.1%
Display mode: double four digit 0.28 Nixie tube
Measurement range: 0V-100V (voltage), minimum display 0.1V
The ground wire of the power supply end and the measuring end of the Ammeter adopts a common ground design, that is, the ground wire of the power supply is connected to the ground wire of the test end, so the test end of the Ammeter can only be connected behind the consumer (that is, between the negative pole of the equipment under test and the negative pole of the equipment under test)
1. It is recommended to use separate isolated power supply at the power supply end of the meter head
2. Before use, the shunt must be connected to the circuit first, and then connected to the digital current meter head to prevent the meter head from being damaged by high voltage
Note: 50A/100A requires a shunt to measure current
Package include:
Voltmeter Ammeter X1
Connecting wire X2
Specifications
Key Features
DIY Supplies : ELECTRICAL
Origin : Mainland China
Certification : none
Features:
1.This module is made of two high-quality LED Nixie tube with high brightness and can display current and voltage at the same time
2.This module uses an imported microcontroller and performs a large amount of data processing on the software, ensuring accurate and stable display
3.This module has exquisite craftsmanship and an ultra small volume
4.This module has reverse connection protection, even if it is reversed, it will not damage the module
5.This module can be used for monitoring the current and voltage of automotive and electric vehicle batteries
Parameters:
Module Name: Current and Voltage Display Module
Measurement range: 10A/50A/100A (current)
Working current: less than 10MA
Storage temperature: -10 ℃ to+65 ℃
Measurement accuracy: 0.1%
Display mode: double four digit 0.28 Nixie tube
Measurement range: 0V-100V (voltage), minimum display 0.1V
The ground wire of the power supply end and the measuring end of the Ammeter adopts a common ground design, that is, the ground wire of the power supply is connected to the ground wire of the test end, so the test end of the Ammeter can only be connected behind the consumer (that is, between the negative pole of the equipment under test and the negative pole of the equipment under test)
1. It is recommended to use separate isolated power supply at the power supply end of the meter head
2. Before use, the shunt must be connected to the circuit first, and then connected to the digital current meter head to prevent the meter head from being damaged by high voltage
Note: 50A/100A requires a shunt to measure current
Package include:
Voltmeter Ammeter X1
Connecting wire X2
Origin : Mainland China
Certification : none
Features:
1.This module is made of two high-quality LED Nixie tube with high brightness and can display current and voltage at the same time
2.This module uses an imported microcontroller and performs a large amount of data processing on the software, ensuring accurate and stable display
3.This module has exquisite craftsmanship and an ultra small volume
4.This module has reverse connection protection, even if it is reversed, it will not damage the module
5.This module can be used for monitoring the current and voltage of automotive and electric vehicle batteries
Parameters:
Module Name: Current and Voltage Display Module
Measurement range: 10A/50A/100A (current)
Working current: less than 10MA
Storage temperature: -10 ℃ to+65 ℃
Measurement accuracy: 0.1%
Display mode: double four digit 0.28 Nixie tube
Measurement range: 0V-100V (voltage), minimum display 0.1V
The ground wire of the power supply end and the measuring end of the Ammeter adopts a common ground design, that is, the ground wire of the power supply is connected to the ground wire of the test end, so the test end of the Ammeter can only be connected behind the consumer (that is, between the negative pole of the equipment under test and the negative pole of the equipment under test)
1. It is recommended to use separate isolated power supply at the power supply end of the meter head
2. Before use, the shunt must be connected to the circuit first, and then connected to the digital current meter head to prevent the meter head from being damaged by high voltage
Note: 50A/100A requires a shunt to measure current
Package include:
Voltmeter Ammeter X1
Connecting wire X2
What’s in the box
1*package
Specifications
- SKU: GE840IP462A1ANAFAMZ
- Model: avoid chenicals
- Production Country: China
- Size (L x W x H cm): 12 x 13 x 14 cm
- Weight (kg): 1
Customer Feedback
This product has no ratings yet.
/product/52/0487182/1.jpg?9814)
Digital Voltmeter Ammeter DC 100V 200V 50A100A Voltage Current Meter Tester LED Display
KSh 5,387
KSh 7,54229%
Questions about this product?