DIY Video Capture Card GB Interceptor Built In RP2040 Board

Detailed Information About The Product:

The GB Interceptor is an adapter that goes between an unmodified Game Boy and the cartridge and offers a video stream of the game via USB. The core processing unit consists of the for Raspberry Pi rp2040.
This product is mainly based on the open source project GB Interceptor(https://github.com/Staacks/gbinterceptor)
Plug and play without modifying the Gameboy
Capture or stream Game Boy gameplay footage via USB. Compatible with a variety of Gameboy consoles
Usage Note: you do not need to open the video stream first. The only important step is that the GBinterceptor is powered via USB before the Game Boy is turned on.Plug the gbInterceptor into the gameboy console, then plug in the game card. Connect the GbInterceptor to your computer ,then turn on the Gameboy, Load the game video source on the video software device

Buttons
[Mode] button (next to the LEDs)
switch between grayscale/green colors and toggle frame blending. Each press switches colors and frame blending is toggled each time it returns to grayscale.
[Flash] button (near the center, usually inside the case)
only used to flash a new firmware version. Simply hold it while plugging in the USB cable. The Interceptor should appear as a storage device (like a USB stick) and you can simply drag the new firmware file (a uf2 file) into it.
Compatible devices:
for Game Boy ( DMG)
for Game Boy Advance (AGB-001)
for Game Boy Advance SP
for Game Boy Color
for Game Boy Player for GameCube
for Game Boy Pocket
for Super Game Boy
LEDs
The red LED indicates that the Interceptor is powered.
The blue LED stays on as long as the Interceptor is in sync with the game. (It may shortly turn off for a fraction of a second when the Game Boy turns the display off, i.e. when loading a level.)
Colour:Red
Material:plastic


Package Contents:
1 x Video Capture Card

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.