DM-W3001 XH-W3001/W3002 Digital Control Temperature Microcomputer Thermostat

W3001

Features:

automatic mode

Wide temperature control range

High temperature control accuracy

reverse connection protection

easy installation

Product parameter

Product name: Microcomputer temperature controller

Product Model: XH-W3001

Supply voltage: 12/24/220V

Temperature measurement range: -50℃~110℃

Temperature control range: -50℃~110℃

Temperature control accuracy: 0.1℃

Load power: 120/240/1500W

Measurement input: NTC10K waterproof probe L=1 meter

output type: direct output

Output capacity: max 10A

Installation hole distance: 73mm (diameter 4mm)

Appearance size: 60*45*31mm

Instruction

To set the startup temperature:

Pre the up on once, the startup temperature will be displayed, long pre the up on for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down on

Set stop temperature:

Pre the down on once to display the stop temperature, long pre the on for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down on

reset:

When the power is on, pre and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory setting

Shipping list:

Thermostat X1

W3002

Introduction to the selling point:

The high-brightne digital tube clearly displays, whether it is used during the day or at night, it can be read clearly

The r can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will

ABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance, anti-aging

-50~110℃ ultra-wide temperature control range, can be used in various temperature control fields, 0.1℃ temperature control accuracy, to meet your control need

Wiring input and output design, more convenient to use in various industrial control equipment, multi-strand wire 300V/20A exce configuration, safe and reliable

product information:

Product name: Microcomputer temperature controller

Product Model::XH-W3002

Temperature measurement range: -50~110℃

Temperature control range: -50~110℃

Temperature measurement accuracy: ±0.2℃

Temperature control accuracy: ±0.1℃

Measurement input: NTC10K L=1 meter waterproof probe

Input power: 12/24/220V

Output power: 120/240/1500W

output type: direct output

Output capacity: max 10A

Installation hole distance: 73mm (diameter 4mm)

Appearance size: 60*45*31mm

Set up using:

Code and function introduction

P0 set startup temperature

Pre the setting on once to enter the internal menu, the default display is P0, pre the setting on again, and set the required startup temperature by preing the up and down ons.

P1 set stop temperature

Pre the setting on once to enter the internal menu, the digital display is P0, switch to P1 by preing the up and down ons, pre the setting on again, and set the desired stop temperature by preing the up and down ons.

P2 Set temperature correction

Enter the internal menu in the same way, switch to P2 by preing the up and down ons, pre the setting on again, and set the required calibration temperature by preing the up and down ons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.

P3 set delay start

Enter the internal menu in the same way, switch to P3 by preing the up and down keys, pre the setting key again, and set the required delay time (unit is minutes) by preing the up and down keys. Delay start is generally used for compreor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compreor back preure, the general setting value is 3-6 minutes. If you are not used to control the compreor or do not need delay time function, skip this item directly.

Shipping list:

Thermostat X1

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.