Detailed Information About The Product:
Note: The host graphics card can no longer be connected to the DP cable or HDMI cable directly connected to the main monitor, if connected, to be dialed off.
Colour:Black
Material:Metal
If there are slight differences in the appearance pictures, it will not affect the use of the product.
Indicator light:
[D1]: Power light (will light up when power is on)
[D2]: Fusion function on/off indicator (long bright fusion function on, not bright fusion function off)
[H2]: HDMI2 vice input signal light (long light normal, not light that no signal over)
[H1]: HDMI1 host input signal lamp (long light normal, does not light means no signal over)
Button function:
[Power]: power switch
[K1]: short press: cycle switching resolution, 1920*1080,2560*1440,
3840*2160,2560*1080,3440*1440.
Description:Long press the [K1] key for three seconds (hold it down until it is displayed): the top left corner of the screen displays the current resolution and refresh rate, the upper host information, the lower vice information
[K2]: short press: switch the upper keying intensity, 0-20 levels of a total of 21 gears, the factory default 0 (0 also keying).
[K3]: Short press: Restore the upper keying intensity to the factory default 0.
[K4]: Short press: Turn on/off the fusion function.
Note: Long press the [K4] key for two seconds to enter the single screen of the vice. To exit, you must also press and hold the [K4] key for two seconds.
Press the [K4] the DMA box D2 light is on, but no perspective fusion, Countermeasures: 1, please set the background of the secondary camera to pure black; 2, press the [K2] key to enhance the RGB value.
The motherboard requires a 12V DC power distribution
Package Contents:
1 x DMA Video Overlay Box
1 x DP Cable
2 x HDMI Cable
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.