Dual Motor Driver Module 1A TB6612FNG For Arduino Microcontroller

Dual Motor Driver Module 1A TB6612FNG For Arduino Microcontroller

Description:

The TB6612FNG motor driver can control up to two motors at a constant current of 1.2A (3.2A peak).
Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz..
The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC.
The output current is rated up to 1.2A per (or up to 3.2A for a short, single pulse).
Decoupling are included on both supply lines.
All pins of the TB6612FNG are broken out to two 0.1 inch pitch headers.
The pins are arranged such that input pins are on one side and output pins are on the .

Feature:

Standby control to save
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1 inch spaced pins
Filtering on both supply lines

Specification:

Dimension: 0.8 x 0.8 inch
supply voltage: VM=15V , VCC=2.7-5.5V
Output current: Iout=1.2A (average) / 3.2A (peak)

Package included:

1 x Dual motor driver module






Dual Motor Driver Module 1A TB6612FNG For Arduino Microcontroller



Description:



The TB6612FNG motor driver can control up to two motors at a constant current of 1.2A (3.2A peak).

Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.

The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz..

The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC.

The output current is rated up to 1.2A per (or up to 3.2A for a short, single pulse).

Decoupling are included on both supply lines.

All pins of the TB6612FNG are broken out to two 0.1 inch pitch headers.

The pins are arranged such that input pins are on one side and output pins are on the .



Feature:



Standby control to save

CW/CCW/short brake/stop motor control modes

Built-in thermal shutdown circuit and low voltage detecting circuit

All pins of the TB6612FNG broken out to 0.1 inch spaced pins

Filtering on both supply lines



Specification:



Dimension: 0.8 x 0.8 inch

supply voltage: VM=15V , VCC=2.7-5.5V

Output current: Iout=1.2A (average) / 3.2A (peak)



Package included:



1 x Dual motor driver module




















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a