DYN‑200 100N.M Dynamic Torsion Sensor Motor Speed Power Test

Description:
1. Suitable for real‑time display of the current measured torsion value and speed value.
2. Can directly calculate the current power value.
3. Support RS485 communication, support active upload protocol, communication rate up to 500 times per second.
4. Support simultaneous output of transmission current and transmission voltage.
5. The sensor comes with OLED display with a resolution of 128x64.
6. Can perform simple calibration, clearing, filtering and other operations.
7. Allow the sensor to be overloaded by 150%.
8. The accuracy achieves an accuracy of 1/1000 or more, and excellent zero‑point stability.
9. Non‑contact, no maintenance, no wearing parts, no life limit.


Specifications:
Item Type: Dynamic Torsion Sensor
Rated Capacity: ± 20000N.m
Power Input: DC24V
Current Consumption: Below 200mA
Torsion Output: ± 5VDC; 0-10V; 4-20mA
Speed Output: 60 pulses / revolution
Response Performance: 1kHz
Load Resistance: 2kΩ or more
Signal Delay: 2.6ms (50% response)
Allow Overload: 150% FS
Operating Temperature Range: -10 ~ + 50 ℃
Non-linearity: 0.1% FS
Repeatability: 0.03% FS
Lag: 0.03%
Temperature Effect Of Zero Point: 0.01% FS / C
Temperature Effect Of Output: 0.01% FS / C
Rated Speed: 8000rpm
The Fastest Rotation Speed: 15000rpm
Maximum Twisted Angle: 2.60 × 10rad (0.149 °)
Moment Of Inertia: 0.38kgcm
Vibration Natural Frequency (rotor Part): 19.4kHz
Torsion Constant: 3.85 × 10Nm / rad.


Package list::
1 x Sensor 1 x Line
Note: