EBD-A20H Battery Tester 30V 20A 200W Multifunction Direct

EBD-A20H is a quality electric load with multiple discharge mode, suitable for all kinds of battery capacity test and powersupply test. Large LCD display, you can see the voltage, current, capacity, time, , energy and other test data clearly. It can be connected to the computers and has extended functions through online software.



Features:

Compact size, light weight and portable, wear resistant and can provide long sercive time.

Large LCD display, you can see the voltage, current, capacity, time, , energy and other test data clearly.

20A discharge, the maximum discharge is 200W.

Four-wire detection, voltage test and current channel are separate wiring, to ensure measurement accuracy.

3 working modes settable design, you can set DSC-CC, DSC-CP according to your demands.

With multiple discharge mode, suitable for all kinds of battery capacity test and powersupply test.

Support c-omputer online control, curve plotting, calibration benchmarking, firmware upgrade, cycle discharge etc..



Specifications:

Name: Battery Tester

Model: EBD-A20H

Material: aluminum alloy

Configuration: simple configuration, standard configuration EU-Plug, standard configuration US-Plug (optional)

Voltage setting: Discaharge: 0.00-30.00V, the minimum step 0.01V

Current setting: Discharge: 0.10-20.00A Minimum step 0.01A (automatic limit current when is overrun)

Mode setting: DSC-CC: the discharge current is constant, it can be used to test the battery capacity or powersupply current

DSC-CP: the discharge is constant, it can be used to simulate constant equipment or test the of powersupply

Voltage test: 0.000-4.500V (low pressure gear) accuracy to 0.003V, error ±0.5%

4.50V-30.00V (high presure gear) accuracy to 0.01V, error ± 0.5%

Current test: 0.10-20.00A, accuracy to 0.01A, error ± 0.5%

Capacity test: 10Ah, the resolution is 0.001Ah

10Ah-100Ah, the resolution is 0.01Ah

above 100Ah, the resolution is 0.1Ah

Discharge : max 200W

Connection: four-wire detection, voltage test and current channel are separate wiring, to ensure measurement accuracy

LCD display: voltage, current, capacity, time, , energy and other test data

C-omputer Online: dedicated USB to TTL serial port (not an ordinary USB cable) support c-omputer control, curve plotting, calibration benchmarking, firmware upgrade, cycle discharge etc..

Package size: 380 * 290 * 150mm / 14.96 * 11.42 * 5.91in

Package weight:

Simple configuration: 1800g / 3.97lb

Standard configuration: 2000g / 4.41lb



Note:

The discharge current is limited by max , less than 20A when above 10V, less than 10A when above 20V.



Packing List(simple configuration):

​1 * Battery Tester

1 * Test Lines



OR



Packing List(standard configuration):

​1 * Battery Tester

1 * Test Lines

1 * USB to TTL Serial Port Line

1 * DC12V 1A S-upply