Electric Garment Steamer Handheld IronsteamMachine

Material: ABS

Size: 13*6.5*8.5cm

Rated voltage: 220V (European standard), 110V (American standard)

Rated frequency: 50/60HZ

Power cord: plug-in type

Rated power: 38W

Water tank capacity: 50ml

Function: dry and wet double ironing

Features: The handle can be rotated 180°

Use introduction:

1. Power on: Insert the plug of the wire into the socket at the end of the handle, and then plug the other end of the wire into the power socket, the LED light in the transparent water tank will light up, indicating that the iron is working

2. Water spray inspection: When ironing, the machine needs to be placed on a soft rubber pad at any time, and then press the water spray button on the handle to check whether the spray hole in the center of the ironing board sprays water mist normally

3. The machine warms up: After turning it on, wait for 60 seconds, the water droplets on the panel will make a noise, and then start ironing

4. Wet ironing: After the power is turned on, the LED light in the transparent water tank lights up. After turning on the machine, touch the spray button to spray and humidify. After preheating for 60 seconds, you can start ironing clothes after turning off the spray. Dry ironing: After turning on the machine and waiting for a while, proceed to iron directly

5. Ironing method

Flat ironing: Lay the clothes flat on the table, spray some water on the wrinkles, press the clothes with one hand, and press the mini iron on the wrinkles with the other hand to move slowly and the wrinkles disappear. If it is a heat-sensitive fabric, first A thin cloth must be covered on the crease, the iron must be ironed on the thin cloth, and the sharp corners of the panel are used exclusively for ironing buttons, pockets, corners, and crevices

Hang ironing: hang the clothes on a hanger, spray water on the wrinkles, tighten the clothes with one hand, and slowly move the clothes up and down with a small iron with the other hand, the wrinkles disappear