Float Switch Water Level Controller For Tank Pump Sump Pump, Water Tank

A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. Depending on the counterweight and pre-set trigger, the mechanical switch opens or closes allowing an electrical current through it to the connected device. Typically, this connected device either stops or starts the inflow of the liquid. A float switch consists of a hollow floating body and an internal switch, also called a sensor. The most common internal switch is a reed switch, so there is also a magnet inside the body. There are other types of internal switches, but the working principle that they open/close due to gravity and water level moving the float switch vertically up or down is the same. Therefore, the mechanical switch creates an open or closed electrical circuit.
Material: PP
Protection class: IP65
Working pressure: 0.1MPa
Rated current/voltage: 16A/ 250V
Operating temperature: 0~75℃
Electrical life: 1 x 100 000 times
Mechanical life: 5 x 100 000 times
Cylinder: 61x55mm/ 2.4x2.17inch