FNC88 PD Trigger Type-C Voltmeter Ammeter Voltage Current Meter Multimeter PD Charger Battery USB Testers,Default NO

Functions Brief Introduction:

screen flip, data storage, fast charge identification, energy capacity detection, temperature measurement, screen off function, accuracy measurement, low internal resistance and wide voltage, two-way charging, fast charging bait.

Features:

1.The FNC88 uses a 0.96-inch IPS high-definition color LCD display with a wide-angle of 160 degrees, high brightness and long life, so you can enjoy clear colors from a wide angle and a natural and natural display.

2.Two-way data measurement, which can be measured separately via USB plug and mobile phone.

3.The FNC88 has 4-bit accuracy, more accurate measurement results, and internal professional instrument sampling circuitry, plus special precision algorithms to ensure product accuracy and stability at the hardware and software levels.

4.Fast charging bait is widely compatible. One-button automatic detection charger supports fast charging protocol (QC2.0 / QC3.0 / FCP / SCP / AFC / PD3.0).

5.Power off storage to ensure data. The FNC88 has a power-down storage function. When the mobile power is turned off, it can store capacity and energy data, which makes it easy to view and measure the capacity of the mobile power source later.

6.Measure the equivalent impedance power of the load, clearly understand the impedance of the load and the current discharge power; better grasp the range of use of the load, more convenient and fast.

7.Measure the quality of the charger, connect the same load, compare the no-load and load, the larger the voltage drop, the smaller the load of the charger, the worse the quality, the voltage drop is not obvious or the voltage is high, indicating that the charger is loaded, quality will be better.

8.Internal real-time temperature monitoring, high-precision thermistor sensor, can measure the ambient temperature and grasp the working status of the tester in real time.

9.Human-computer interaction interface, high-definition display, simple interface, novel features.

10.Both inside and outside are small bodies and big energy. The protective film is abrasion resistant and scratch resistant.

Specification:

Main material: ABS

Colour: Black

Input indicator:

VBUS main voltage range: 0-> 24V

Main current range: 0-> 5A

USB interface voltage range: 5V

D + / D- signal pin withstand voltage range: 3.3V

CC1 / CC2 signal pin withstand voltage range: 3.3V

Measurement standard:

VBUS main voltage:

Resolution: 0.0001V

Accuracy: ±(0.5‰+ 2LSB) at 25 degC

Main current:

Resolution: 0.0001A

Accuracy: ±(1‰+ 2LSB) at 25 degC

Resolution: 0.01W

Measuring range: 0-> 150.00W

Operating temperature range: 0-> 65 degC / 32-> 149 Fahrenheit

Capacity: 0-> 99999.9mAh (5 groups)

Electricity: 0-> 9999.99Wh (5 groups)

Time: 0-> 999h: 59m: 59s

Item size: 49 * 22 * 8mm / 1.9 * 0.9 * 0.3in

FNC88 interface:

1.USB-C 3.1 male two way (5A)

2.USB-C 3.1 two-way female (5A)

3.Micro USB female data transmission

Voltage and current measurement system:

1.16Bit ADC high precision measurement chip

2.Sampling rate is up to thousand times per second

3.Wide voltage measurement (0-24V)

4.Large current measurement (0-5A)

Offline data storage:

1.5 groups of capacity / power data record

2.Select the recording interval

Support USB power supply (PD3.0) protocol:

1.Built-in PD physical chip

2.Support fast charging protocol triggering, such as PD2.0 / PD3.0

Fast charge protocol trigger (6 in 1)

Support Qualcomm QC2.0/QC3.0

Support Huawei FCP/SCP

Support Samsung AFC

Fast charging protocol detection:

One-button automatic detection charger supports fast charging protocol (QC2.0 / QC3.0 / FCP / SCP / AFC / PD3.0)

PC software:

1.Support firmware upgrade, free driver

Other functions:

1.Equipment internal temperature monitoring

2.Custom screen, timed black screen

3.0.96-inch HD IPS LCD screen, high wide angle, rich colors

Application:

1 Mobile phone charging power detection

2.Mobile power input and output test

3.Charger fast charging protocol test

Note:

1. Please do not connect more than 24V power to the USB tester.

2. When using the fast charge trigger function, do not connect various USB devices. Applying a high voltage during triggering can cause the device to burn or even catch fire.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.