For JAMMA PC Board 2 Slots Easy To Install Multi For JA

Feature:
1. Easy to Install: You can plug 2 different for JAMMA PCBs into one cabinet and select the game to play by pressing the switch control button. To install, simply plug the PCBs into the existing for JAMMA harness. It is easy to install and works perfectly.
2. Easy to Use: Easily install two different for JAMMA PCBs (or non for JAMMA with for JAMMA adapters) into a single for JAMMA cabinet! This 2 in 1 Multi for JAMMA switch board is easy to install and works with a quick push of a button. Wired switch function is included.
3. 2 Slots: This 2 in 1 Multi for JAMMA switchboard operates differently than the larger 6 in 1 Multi for JAMMA switcher board. First, both slots (1 and 2) are powered up at the same time, whereas the 6 in 1 switch will only power up one slot at a time. This provides seamless and fast switching between the two installed boards.
4.

Feature: Multiple input options (input via for JAMMA slot, VGA connection, RGB S connection and L/R sound input), slot 1 is automatically enabled and played when first powered on. Both slots power up simultaneously, switcher routing +5VDC, +12VDC and ‑5VDC, switcher routing service and test button functions, and up to 4 firing buttons per player, quick and easy setup.
5. Applicability: The 2 in 1 for JAMMA PC Switch is suitable for installation in public gaming rooms, which is a must (so that customers don't have to wait for the second gaming board to power up and test itself, if the ...... game is selected it is already up and prepared to go).

Specification:

Item Type: for JAMMA 2 in 1 Switch
Material: PCB
Multiple Input Options: Input Via for JAMMA Slot, VGA Connection, RGB S Connection, and L/R Sound Input
Remote Control Battery: 50mAh Li ion Battery (Included).

Package List:

1 x for JAMMA 2 in 1 Switch1 x Remote Control
Note:
Technical Note: This switcher will not switch video with the 400 in 1 for Pandora V2 PCB board that uses VGA video. In order to use this board, the VGA video needs to be switched manually using the VGA switch box. Video clips need to be switched separately to switch properly. If you are using a CGA tube monitor, there is no problem.Monitors: If you are using a CGA monitor, simply connect the monitor off the for Jamma harness. If you are using a VGA monitor, you must set the for Jamma board to VGA and then plug the two for Jamma board VGA ports from the board into the switch's VGA inputs using a male male VGA patch cable.