For Oculus Quest 2 VR Gles Controller ic Charging Base with Battery Set Accessories Compatible with Third Party Headset

For Oculus Quest 2 VR Glaes Controller ic Charging Base with Battery Set Acceories Compatible with Third Party Headset

Oculus Quest 2 VR glaes handle ic charging baseRequired charger output: 5V>2A1. When the charging stand charges the VR and two handles at the same time, in order to provide sufficient current, the charging stand must be equipped with a charger with an output of more than 5V2A2. The charger provided in the 0culusQuest2 package can be used for this charging standSteps to charge the 1. Connect the charger above 5V2A to the charging seat (the charger is not included in this package, the customer needs to purchase it separately). The charging seat turns on the green light and enters the power-on standby state2. Insert the Type-c ic head into the charging hole of the 3. Put the vertically into the corresponding charging position of the charging base. When charging starts,The charging LED indicator lights up yellowSteps to charge the handle1. Connect the charger with 5V2A or above to the charging seat (the charger is not included in this package, customers need to purchase it separately). The charging seat turns on the green light and enters the power-on standby state2. Slide the battery cover of the handle down and take out the battery cover3. Install the battery for the handle. When installing, please pay attention to the Type-C charging port of the battery as far as poible.4. Install the battery cover provided in this package on the handle5. Use the provided in this package to adjust the Type-C charging port of the battery to align with the hole of the battery cover6. Insert the ic head into the Type-C charging port of the battery through the hole of the battery cover7. Put the handle into the corresponding charging position of the charging base and let the ic suction head contact to charge.At the beginning, the LED indicator of the cradle will light up yellow (please note that the handle is divided into left and right, please p the handle according to the "L" and "R" marks on the cradle)If you want to take out the ic head of the handle, please use the provided in the package to pick out the ic headSpecification*Battery type: Lithium polymer battery*Battery capacity: 1800mAh*Grip battery life: about 36 hours*Charging current: : Max 1.4A Handle: Max 500mA*Charging time: : about 3.5 hours handle: about 2.5 hoursDock charge indicator*Standby mode: green light*Charging: Yellow light*Full: green light*Compatible with third-party headset