Detailed Information About The Product:
Name:For Raspberry Pi Pico with WiFi RP2040 Microcontroller Development Board with Acrylic Case GPIO Header, Unsoldered
This is a tiny, fast, and versatile board built using RP2040, the microcontroller chip.
Programmable in C and for MicroPython, Pico W is adaptable to a vast range of applications and skill levels, and getting started is as easy as dragging and dropping a file.
More experienced users can take advantage of for Raspberry Pi Pico's rich peripheral set, including SPI, I2C, and eight Programmable I/O (PIO) state machines for custom peripheral support.
Connect Wirelessly:
Network your Pico for a complete IoT solution. for Raspberry Pi Pico W comes with a fully certified module on board featuring 2.4GHz 802.11n wireless LAN, making it the perfect solution for loT applications and projects requiring wireless communication.
Specification:
21 mm x 51 mm form factor
Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
264kB on-chip SRAM
2MB on-board QSPI flash
2.4GHz 802.11n wireless LAN (for Raspberry Pi Pico W and WH only)
26 multifunction GPIO pins, including 3 analogue inputs
2 x UART, 2 x SPI controllers, 2 x I2C controllers, 16 x PWM channels
1 x USB 1.1 controller and PHY, with host and device support
8 x Programmable I/O (PIO) state machines for custom peripheral support
Supported input power 1.8-5.5V DC
Operating temperature -20°C to +85°C (for Raspberry Pi Pico and Pico H); -20°C to +70°C (for Raspberry Pi Pico W and Pico WH)
Castellated module allows soldering direct to carrier boards (for Raspberry Pi Pico and Pico W only)
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
Accurate on-chip clock
Temperature sensor
Accelerated integer and floating-point libraries on-chip
Color: green
Material: PCB+Acrylic
Package Contents:
1 x development board (pin headers not soldered)
3 x pin headers
1 x shell (upper shell + lower shell)
4 x screws (screw color random Do not accept designation)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.