For RasPi Flexible Microcontroller Board Dual Core 264K

Feature:
1. High Performance: for Pico Boot features a flexible digital interface with two ARM Cortex M0+ cores up to 133 MHz; 256 kb of RAM; 30 GPIO pins; and a wide range of interface options. It also comes with 16 MB of on board QSPI flash memory for code and data storage.
2. For SD2SP2 Pro Adapter: Ensure that there is a serial port 2 on the bottom of the for Game console and that it can be read directly, the for SD2SP2 Pro adapter needs to be used with for swiss, for xeno, for GCloader Lite or pcioboot and it will automatically load the Micro Storage card game list with a maximum of 512GB of memory.
3. Multiple Software Support: for RasPi Pico microcontroller module has rich and complete software support, it is equipped with full compatibility with the official version of RasPi C/C++ SDK, Micro python SDK. maximum operating current up to 500 mA.
4. Support USB TYPE C Interface: for Castellated module allows direct soldering to the carrier board One button reset button function, quick and easy, low power sleep and hibernate mode, drag and drop programming using mass storage via USB.
5. Rich Hardware Interface: for RasPi Pico has 26 x multifunction for GPIO pins, 2 x SPI, 2 x I2C, 2 x UART, 3 x 12 bit ADC, 16 x controllable PWM channels, on chip precise clock and timer, temperature sensor, accelerated on chip floating point library, 8 x programmable I/O (PIO) state machine, custom peripheral support.
Specification:
Item Type: for RasPi Microcontroller Board
Material: PCBA
Size: Approx. 5.1 x 2.1 x 0.4cm/2.0 x 0.8 x 0.2in
Interface: USB C
Processor: Dual Core Arm Cortex M0+ Processor
Chip: for RasPi RP2040 Microcontroller Chip
On Board Flash Memory: 16MB
SRAM: 264K
Maximum Operating Current: 500mA
for SD2SP2 Pro Interface: Micro Storage Card (Maximum 512GB)
Features
Official for RasPi Pico Module
Easy to Install, Only 5 Wires Are Needed for Soldering
Detailed Soldering Tutorial and Video Instructions
Programming Via USB Cable, No Drivers or Programs Required
Automatically Launches Any Dol Application of Your Choice (switzerland)
Uses the "IPL Injection" Method Which is Superior to Mods Like for XenoGC
Complete Replacement for XENO+SWISS Boot Disk Method of Operation
26 x Multifunction GPIO Pins
2 x SPI, 2 x I2C, 2 x Uart, 3 x 12 Bit ADC, 16 x Controllable Pwm Channels.

Package List:
1 x for Picoboot Development Board Copied Program 5 x Electronic Wire1 x Heat Shrink Tube1 x Plastic Bracket1 x Double Sided Adhesive4 x Silicone Film1 x for SD2SP2 PRO Adapter1 x for SD2SP2 PRO Card Reader
Note:
Please allow some errors due to manual measurement.