GBS Control GBSC Video Converter RGBS VGA Scart Ypbpr Signal to VGA HDMI For Retro Game Consoles SEGA Dreamcase PS2 NGC

GBS Control GBSC RGBS VGA Scart Ypbpr Signal to VGA HDMI For Retro Game Consoles SEGA Dreamcase PS2 NGC

GBS Control is an improved GB200 RGB to VGA converter board, and an alternative for Tvia Trueview5725 based upscaler / Video converter board. The of this device is powered by gbs-control designed by ramapcsx2, used with permiion under an open-source copyright.

https://hub.com/ramapcsx2/gbs-control

Note

When you encounter probl in use, you can communicate with us at first. There is no need to open disputes or leave bad comments in the first p. Because you didn't communicate with us in time, we can't know what problem you encountered. We can provide corresponding technical support and slove method. We will be responsible for customers and products. Please trust us, thank you.

Attentions:

1) This device can't support composite and S-video signal.As well as can't support JP RGB21 and RF.2) HDMI and VGA outputs will not both work at the same time, You will only need one connected at a time.3) If you want to switch the video input signal (when you have more than one input video source connected into this device), you need to power off the device first to avoid potentially dam the device.4) When using, please refer to the instruction manual first. Any questions, please contact us.

Feratures:

1) Almost zero latency.2) Supports most retro video game consoles.3) Supports RGBS, RGSB, RGBS SCART, RGBHV, Component and VGA Input.4) Supports RGBS, VGA, Component and HDMI Outputs.5) Supports high fidelity audio output.6) Built in Si5351 stable clock .7) Supports Video image adjustment.8) Ability to balance the amplitude of the three primary color signals - R, G, B.9) Supports upscaling up to 1080p.10) Supports downscaling to 240p/288p (Only through the Saturn AV Connector).11) No synchronization lo switching between 240p/480i or 288p/576i.12) Supported resolutions include:(240p/288p/480i/480p/576i/576p/640p/720p/960p/1024p/1080p).13) OLED Screen and WIFI web configuration pages help you e settings changes easily.14) Supports upgrades via the micro-USB connector.

Instructions:

When connecting to RGBS signal, please turn on RGBS syns signal.When connecting 480p progreive RGBS signal, please turn on RGBS sync and Green sync.When connecting component signal, please turn off RGBS sync.When connecting VGA signal, please turn on Green sync and turn off RGBS sync.

Update Guide

STEP1: Download the NodeMCU-pyFer: (https://hub.com/marcelstoer/nodemcu-pyfer/releases)

GBS control : (https://hub.com/RetroScaler/GBSC)

STEP2: Open “nodemcu-PyFer”

Connect the GBS control to your computer using the micro usb cable. Select the

proper COM port for your computer and choose the latest GBS control .

STEP3:Click "F NodeMCU". then wait for the installation to complete.

Web Gui Introductions

LOG IN TO THE WEB GUI:Step1: Search for WIFI through phone or PC.WifiName: gbscontrolPaword: qqqqqqqqStep2: Enter IP (192.168.4.1) or URL (http://gbscontrol) in the browser addre bar and go.Step3: Click GBSC to enter the configuration page.

FAQ:

Q1: Does it work with video game system pal? Or do I have to modify my game from pal to NTSC?A1: Yes, It work. And you needn't to modify the games from PAL to NTSC.Q2: Does GBSC improve the resolution on Nintendo 64?A2: Yes, It does. But It only can support the N64 console which can output RGBS signl. But can't support the N64 console which only can output AV and S-video Signal.Q3: Can I use 5V2A power supply?

A3: Sure, friend. Since the voltage of each country may be different, some customers have reported that the effect of 5V2A power supply may be more stable. The equipped 5V1.5A power supply is available after our production test. Please use it with confidence.Q4: Which signal inputs are supported?A4: Supports RGBS, RGSB, RGBS SCART, RGBHV, Component and VGA Input. So, please confirm that your game console has these signal input methods before purchasing.Q5: Whether to install the clock module?A6: Built in Si5351 stable clock .Q6: Is it poible to upgrade the ?A6: Support upgrade, the latest version can be obtained through retroscaler hub（https://hub.com/RetroScaler/GBSC).Q7: Is this product developed based on the open source project gbs-control?A7: Yes，only the version of this product is based on the open source project gbs-control, the hardware version is completely s-designed, and has been open source, please check for details（https://hub.com/RetroScaler/GBSC).Q8: s cannot be set on the web UI interface?A8: lf you want to save your customizations, first select a slot for your new preset, then save to or load from that slot.Q9: What format video signal is supported？A9: Supported standards are NTSC / PAL, the EDTV and HD formats.Q10: GBSC cannot output HDMI video signal.A10: The first step : check whether the HDMI switch is turned on.The second step : call up the signal function through the OLED display to check whether there is a signal input.The third step :If no input signal is detected, check whether the correct signal source is input.Q11: Does GBSC support simultaneous output of VGA signal and HDMI signal?A11: Unable to output at the same time, it will cause the video screen to be dark.Q12: Can GBSC connect a PC use VGA cable, and from it output the image to the TV using RGBS saturn connector in RGB scart?A12: Yes, It can.Q13: Can this device support 15khz output from Atari or Amiga computers?A13：Yes, It can.Q14: Does GBS Control support custom resolutions, custom timings at the output?A14: It doesn’t support custom the resolutions.Q15: Does It have the scanline function?A15: It has scanline function.Q16: Does it support AV and S-Video signal input?A16: No, friends.If you need AV/SV signal input products, you can click the link for more details: https://www.aliexpre.us/item/3256804850466089.html

Q17: Is it suitable for SNES and SFC game consoles?

A17: Friends, theoretically these two game consoles are not applicable. Because they are not RGBS signal output. But if your game console has changed the RGBS signal output, it can be applied to our product.

Q18: Is it support Scart Cable Sync on Luma?

A18:No,it doesn't support.it supports Composite Sync.