1. Use voltage 100-240V, frequency 50-60HZ.
2. This product is a high-temperature glue gun. It should be selected according to the product series. If the user uses a strip of different size or type, it may cause the melt back to damage the glue gun.
3. When working, the nozzle of the glue gun and the molten glue have a higher temperature, and the human body must not touch; it is forbidden to be used in places with inflammable and explosive.
4. When the glue gun is working, you can't lift the glue gun, the gun nozzle can't face upwards; if it doesn't glue for 15 minutes, please cut off the power supply, so as not to melt the rubber strip and cause the glue to be damaged.
5. Due to the installation of durable materials in the glue gun, smoke may occur during the first use. After 30 minutes, the smoke is automatically eliminated.
6. Always keep the gun tail slider clean to ensure that the strip can be smoothly fed into the barrel.
7. It is forbidden to pull the rubber strip from the glue gun out of the tail of the glue gun.
8. When the glue gun is not in use, it should be placed in a dry and ventilated place. It should not be placed in a damp or watery place. It should not be placed in a place where children or children can get it.
9. This tool must be placed on its stand when not in use.
This product uses ceramic PTC thermistor as a heating element, and the heating rate is fast. The PTC thermistor is automatically thermostated, and the temperature does not rise when it rises to the design temperature of the glue gun. It can prevent damage to the glue gun caused by overheating of the heating element, save energy and achieve longevity. 2. The electrical insulation strength of this product is not broken down when the power is 3750V/min. It can be used normally in the AC or DC power supply between 110V~240V. It is not restricted by voltage fluctuations. The built-in safety fuse is safer to use.
1. This series of products can be used with strips with a diameter of 7-7.5 mm.
2. Insert the strip from the tail of the glue gun and send it to the barrel. After plugging in the power for 5-8 minutes, the trigger can be squeezed out and the amount of glue can be controlled.
3. In the process of use, if you can't use one glue stick at a time, the glue stick does not need to be taken out. You can plug it in the power supply for 5-8 minutes and use it directly.
1 *Glue gun + 5 glue sticks
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!