Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter Receiver For Sony Nikon PenStudio Speedlite Flash Lighting

Godox CT-16 16 Channels Wirele Radio Flash Trigger nsmitter Receiver for Sony Nikon PenStudio Speedlite Flash Lighting

The e trigger for studio flashes and outdoor flash is d as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wirele e control. The signal nsmitter adopts the advanced circuit and components, and can nsmit the coded FM wirele signal. The circuit of the nsmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely ca no damage to the flash contact of the camera. The nsmitter is applicable to the ditional or digital camera with hot shoe or PC controlling interface. Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the de, which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/250sec. All the models of the product uniquely have the multi-frequency isolation technique and the s matching function by rs. rs can freely match and the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting envments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance. Features - Universal hot shoe interface - 433MHz nsmit frequency secures fast response and stable nsmiion - 16 channels, nsmitting distance up to 30m, no limits with directions or angles - Maximum synchronous speed up to 1/250 second - With studio flash interface, can wirelely trigger several kinds of studio flashes - Speedy frequency regulation, convenient for photographers to shoot - Energy-saving design with 12V 23A battery for nsmitter and two AAA batteries (not included) for receiver - Comes with a PC sync cord for cameras without hot shoe connections Note: This trigger does not support TTL function. Compatible with: For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24; For 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX; For PenAF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT; For Olympus FL-50, FL36; For Sigma EF-500 DG Super, EF-500 DG ST, EF-430; For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AF44D, 333D; For Vivitar 285HV (Older Vivitar 285/283 works only with PC sync); Other flash models with a trigger voltage of 12V or lower; Work with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pen(except for SONY as they a special hot shoe) Specification Model: CT-16 Channel: 16 Channels nsmit Frequency: 433MHz nsmitter Power: 12V 23A battery (Not included) Receiver Power: 2 x 1.5V AAA Battery (Not included) Outdoor operation distance: max. 30m / 90feet (open area, no fraise) Indoor operation distance: max. 25m / 75feet Synchronous speed: Max. 1/250sec nsmitter Dimension: 60x42x30mm Receiver Dimension: 90x50x32mm Color: Black Material: Metal + Plastic Operation How to : Insert the nsmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both nsmitter and receiver at same channel. Pre the Test on on the nsmitter to test before shooting. If your camera does not have hot shoe socket for connecting the nsmitter you can connect the nsmitter to the camera by the PC Sync Cord provided. (Only the old camera needed). You can trigger both the flashgun and studio lights with this flash trigger. If you the receiver on big studio strobe flashlight or AC flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included). Package Listing as shown in the picture you choose

Note: Don't include other product

About shipping
Shipping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, aess and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neul Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the nsaction.