Handheld Vector Network Analyzer 50KHz - 1000MHz Digital MF

Detailed Information About The Product:

This vector network analyzer supports measurement frequency up to 50KHZ-1000KHZ, expandable up to 1.5GHz, the default setting is 1 GHz, and accurate measurement up to 1.35 GHz. The number of data points 101 sweep-period is about 1.9s, fast measurement. With wide dynamic ranges and with parameter storage functions. Added real part amplitude, imaginary part amplitude, resistance graph, and reactance graph line. Trajectory noise is low.
Features: 4.3 inch IPS TFT display, 800 x 480 dots. Support measurement frequency up to 50KHZ-1000KHZ, expandable up to 1.5GHz, the default setting is 1 GHz, and accurate measurement up to 1.35 GHz. The number of data points 101 sweep-period is about 1.9s, fast measurement.
With wide dynamic ranges and with parameter storage functions. Standard Type-C interface, 4000mAs large battery capacity, with high charging speed. The output power of PORT1 is low and the damage power of PORT2 is higher.
Fixed the S21 pass-through 0.3dB bias problem. Fixed a bug where the menu would not respond after marking all. Fixed a bug where a spuriouswave was displayed when the VSWR was infinite.
Added version and information query commands. Added real part amplitude, imaginary part amplitude, resistance graph, and reactance graph line. Trajectory noise is low.

Specifications:
Name: Network Analyzer
Battery: 1 x built-in 3.7V, 5000mAh battery (included)
Measurement frequency: 50KHZ-1000KHZ (expandable to 1.5GHZ)
RF output: -13dBm (maximum -9dBm)
RF accuracy: Less than 0.5ppm
Port SWR: Less than 1.1
Display: 4.3-inch IPS TFT (800 x 480)
Output capacity: 5V/1A, support Android and iOS phones
Scanning points: 101
Calibration points: 101
USB interface: USB Type-C, communication mode CDC (serial)
Display tracking: 4
Marker: 4
Setting save: 5
Scan time: about 1.9seconds / 1 time (50Khz-1000GHZ full frequency band)
Item size: 141 x 75 x 27mm / 5.55 x 2.95 x 1.06in
Color: Black
Material: metal

Package Contents:
1 x Network Analyzer
1 x USB Type-C Cable
2 x SMA Cable
1 x SMA Common Calibration Piece-Open Circuit
1 x SMA Male Calibrator-Short Circuit
1 x SMA Common Calibration Piece-Load
1 x SMA-JJ Female-to-Female Connector

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.