Haute42 Gamerfinger Hitbox Controller Arcade Street Stick Arcade For PC /Ps3/ Ps4 /Switch Mini Hitbox Keyboard

Haute42 Gamerfinger Hitbox Controller Arcade Street Stick Arcade For PC /Ps3/ Ps4 /Switch Mini Hitbox Keyboard

Product Description

Working voltage: 5V

Link method: USB Type-C

Product size: 195mm * 125mm * 16mm

Supported Platforms : pc /ps3/ps4/switch/ Android/SteamProduct Specifications:1Mini Keyboard,1Data Cable Type-C,1Keycap Puller,6 anti slip pads

HautePad G series

Ten years of gaming peripheral experience

Carefully crafted portable Hitbox

Take you back to the arcade er

The heart of never stops!

This is a micro keyboard box, a revolutionary game controller designed for precision and versatility.

Adopting a cost-effective chip, the Raspberry Pi RP2024 main control chip

Dual core ARM Cortex-M0+@ 133MHZ

Supported by dedicated Q bus, up to 16MB off chip f memory

Fully connected AHB croover switch

Integrated 264kB on-chip SRAM in six independent groups

40nm proce node manufacturing, low dynamic power consumption, and low leakage

1ms delay, no frame leakage rate above 95%

Supports updates

more functions and compatibility coming soon

Greywood V4 switch

POM stem

2-stage spring

Initial 30gf min

Total vel 3.6+/-0.3mm

Conduction 1.5+/-0.3mm

Operating force 40+/-3gf

Bottom force 50+/-3gf

This is a nsparent acrylic material with RGB lighting effect which is a mini hitbox style arcade keyboard with 16 ons, providing a comfortable feel and allowing you to enjoy ing games

Notice：EXT. port is used for extension functions,

please do not connect your game console through this port.

For Extension functions

Insert official or third-party donles or controllers to bring hautepad more platforms compatibility or more functions.

01 Compatibility

B — Xinput mode (Windows/Steam)

A — SWITCH mode

X — PS3 / Dinput mode (Raspberry Pi / Android)

Y — PS4 mode (Compatible with PS4 games on PS5 console）

RT — KEYBOARD mode

Input Mode

To change the input mode, hold one of the ons(as shown above) as the controller is plued in.

Tips：

This product defaults to Xinput mode，Input mode is saved acro power cycles.

If there are games that do not compatible the above input modes , you can enter the Web Configurator to modify them for normal use.

PS4 Mode

This product will be disconnected at 8 minutes after connecting to the PS4/PS5 console.

You can avoid this 8-Minute Timeout by uploading the verification files which required for PS4 mode. More details, please check on the official website：www.haute42.com

Web Configurator

This product contains a built-in web-based configuration application which can be started up by holding START when pluing your controller into a PC. Then acce http://192.168.7.1 in a web browser to begin configuration.

TURBO

Hold TURBO，then pre the on which you need to be set for turbo function，then this on will be continuous sending while you pre it,to cancel this turbo key，just repeat the privious step.

The turbo key that set will be cleard when power off.

These keys can be set as a Turbo key: A / B / X / Y / LB / RB / LT / RT

04 RGB LED Setting

●BACK + START + X Next Animation

●BACK + START + A Previous Animation

●BACK + START + Y Brightne Up

●BACK + START + B Brightne Down

●BACK + START + RB LED Up

●BACK + START + RT LED Down

●BACK + START + LB Preed Up

●BACK + START + LT Preed Down

D-Pad Modes

You can switch between the 3 modes for the D-Pad while the controller is in use by preing one of the following default combinations:

● BACK + START + DOWN = D-Pad

● BACK + START + LEFT= Emulate Left og stick

● BACK + START + RIGHT= Emulate Right og stick

D-Pad mode is saved acro power cycles.

Invert D-Pad Y-axis

A tole is available to invert the Y-axis input of the D-pad, allowing some additional input flexibility. The default hotkey to tole is to pre

● HOME + START + RIGHT = Y-axis inversion

This is a temporary hotkey mapping for this feature, so keep an eye on updated releases for this to change.

SOCD Modes

Simultaneous Opposite Cardinal Direction (SOCD) cleaning will ensure the controller obeys certain directional input rules when sending inputs to the computer/console. Users can choose 1 of the 3 SOCD Modes while the controller is in use by preing one of the following on default combinations:

● HOME + START + UP = Up Priority mode

Up + Down = Up, Left + Right = Neul (Standard stickle behavior).

● HOME + START + DOWN = Neul mode

Up + Down = Neul, Left + Right = Neul

● HOME + START +LEFT =Last Input Priority (Last Win)

Hold Up then hold Down = Down, then release and re-pre Up = Up. Applies to both axes.

The selected SOCD mode is saved acro power cycles.

D-Pad Modes

You can switch between the 3 modes for the D-Pad while the controller is in use by preing one of the following default combinations:

● BACK + START + DOWN = D-Pad

● BACK + START + LEFT= Emulate Left og stick

● BACK + START + RIGHT= Emulate Right og stick

D-Pad mode is saved acro power cycles.

Invert D-Pad Y-axis

A tole is available to invert the Y-axis input of the D-pad, allowing some additional input flexibility. The default hotkey to tole is to pre

● HOME + START + RIGHT = Y-axis inversion

This is a temporary hotkey mapping for this feature, so keep an eye on updated releases for this to change.

SOCD Modes

Simultaneous Opposite Cardinal Direction (SOCD) cleaning will ensure the controller obeys certain directional input rules when sending inputs to the computer/console. Users can choose 1 of the 3 SOCD Modes while the controller is in use by preing one of the following on default combinations:

● HOME + START + UP = Up Priority mode

Up + Down = Up, Left + Right = Neul (Standard stickle behavior).

● HOME + START + DOWN = Neul mode

Up + Down = Neul, Left + Right = Neul

● HOME + START +LEFT =Last Input Priority (Last Win)

Hold Up then hold Down = Down, then release and re-pre Up = Up. Applies to both axes.

The selected SOCD mode is saved acro power cycles.