Heat Transfer Paper – 20 Sheets for Light-Colored Fabrics – A4 – DIY T-Shirt Printing

 Product Features:

 Perfect for Custom Designs – Print your favorite photos, logos, quotes, or art onto T-shirts, pillowcases, tote bags, and more!

 Inkjet Printer Friendly – Designed specifically for use with almost ALL inkjet printers.

 For Light-Colored Fabrics – Best results on white or light cotton fabrics (up to 30% poly blend).

 Easy to Trim – Cut around your design for a clean, professional look.

 Iron-On Transfer – No heat press required! Use a standard household iron.

 Value Pack – Comes with 20 high-quality sheets for all your creative projects.

 How to Use: Step-by-Step Guide

Design & Print

Create your design using any graphic software.

Mirror the image (flip horizontally).

Load the white side of the transfer paper into your inkjet printer.

Print on the white (unlined) side.

Cut the Design

Allow the print to dry for a few minutes.

Cut out the design using scissors, leaving a small margin around it.

Prepare the Fabric

Place your T-shirt or fabric on a flat, hard surface (avoid soft ironing boards).

Iron the fabric to remove wrinkles and moisture.

Iron the Transfer

Place the printed transfer face down on the fabric.

Use a dry iron set to high cotton temperature (no steam).

Apply firm, even pressure for 3–4 minutes.

Focus on all corners and edges.

Peel & Reveal

Let it cool slightly (about 30 seconds).

Gently peel off the backing while still warm for best results.

Done! Your custom T-shirt is ready to wear.

 Care Instructions

Wait 24 hours before the first wash.

Wash inside out with cold water.

Do not bleach or dry clean.

Tumble dry low or air dry.