High Power AC90-250V 30A 433MHz Remote Control Switch For W

Detailed Information About The Product:

1. Jogging mode: Press the remote control without releasing the line to power on, release the remote control to disconnect the line
2. Self-locking mode: Press the remote control line to power on, and press the remote control again to disconnect the line;
3. Interlock mode: Press one of the buttons on the remote control (such as A button), the line is powered on, and then press another button on the remote control (such as B button) to disconnect;
4. Jog delay off mode: press the remote control line to power on, release the remote control and start timing, after 5 seconds, 10 seconds, 15 seconds, 20 seconds (4 levels), the line will be automatically disconnected;
5. The function of turning on the light when the power comes in: That is, the whole circuit automatically pulls in after power supply, also known as the function of turning on the light when the power comes in.

1. Working voltage: AC 90-250V 50/60Hz;
2. Load current: ≤30A;
3. Standby current: 3.6mA~5mA;
4. RF frequency: 433MHz;
5. RF working mode: superheterodyne reception;
6. Receiving sensitivity: Greater than 97dbm;
7. Remote control receiving distance: more than 50 meters in open space;
8. Decoding method: MCU software decoding;
9. Modulation method: ASK (anti-interference, strong transmission performance)
10. The number of remote controllers that can be stored: 20
11. Support remote control type: intelligent learning type 1527 learning code, 2262 fixed code (rolling code can be customized);
12. Output type: 1 relay switch signal, with load current less than 10A;
13. Multiple working modes: inching, self-locking, interlocking, delay off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light on when incoming calls;
14. Working environment: -20~80℃
Color: Black & White
Material: ABS

Package Contents:
1x Switch
2x Remote Control

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.