IP68 Water Pump Float Switch 10-16amps (220V-380V) with 1 bar Pressure

The float switch shown in the image is a standard cable-type fluid level controller. It is designed to automatically control the level of liquids in tanks. 

• Rated Voltage: Typically 220V AC to 250V AC, or up to 380V AC for some configurations. 
• Rated Current: Ranges from 10A to 16A.
• Protection Grade: IP68, indicating it is dust-tight and can be submerged in water.
• Max. Working Temperature: Usually around 70∘C70 raised to the composed with power cap C
• Working Pressure: Maximum of 1 bar. 
• Contacts: Features both normally open (NO) and normally closed (NC) contacts, allowing for flexibility in wiring for either filling or draining applications. 
• Material: The float and counterweight housing are made from polypropylene, which resists sewage, oils, acids, and alkalis. 
• Endurance: Mechanical endurance is typically over 100,000 operations, and electrical endurance is over 50,000 operations.
• Dimensions: The float body is approximately 103 x 78 x 44 mm (L x W x H). 

The separate yellow piece in the image is a counterweight used to adjust the switching differential (the difference between the high and low liquid levels).