Kebidu DC 12V Relay 1 Channel Wireless Radio

Kebidu DC 12V relay 1 channel wireless radio frequency remote control switch transmitter receiver 433mhz learning remote control

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Note: The separate remote control is a copy type remote control


Input Voltage: 12 V, RF working mode: Superheterodyne

• Receiver sensitivity: > 97 dbm

• Transmitting distance:> 100 m ( open space)

• Deing mode: MCU software deing

• Remote storage: 20

• Support remote type: EV1527 learning e

• Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )

• Output terminal: NO , NC , COM

• Remote control battery: 2 x 3 V CR2016 on batteries

Note: Maximum input power is 250 V

 

Remote programming




Working mode:




1. Inching mode: press the remote control the relay will connect, and then release the remote controlto disconnect the relay;




2. Self-locking mode: press the remote control the relay will connect, and then press the remote control again to disconnect the relay;




3. Interlock mode: press the remote control key A to connect the relay, and press the remote control key B to disconnect relay.




4. Delay mode: press the remote control the relay will connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.





Learning Methods:




1. Inching learning method:




Press the e pairing on on the control panel once, and the LED indicator will flash once. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




2. Self-locking learning method:




Press the e pairing on on the control panel twice, and the LED indicator will flash twice. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




3. Mutual lock learning method:




Press the e pairing on on the control panel three times, and the LED indicator will flash three times. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




4. 5S delay learning method:




Press the e pairing on on the control panel four times, and the LED indicator will flash four times. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




5. 10S delay learning method:




Press the e pairing on on the control panel five times, and the LED indicator will flash five times. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




6. 15S delay learning method:




Press the e pairing on on the control panel six times, and the LED indicator will flash six times. After the LED indicatorlit, press the on you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.




Clearingmethod:




Press the e pairing on on the control panel eight times, then it will automatically clear all the learned remote controls.After clearing, the remote control previously learned can no lengther be used.

 

Package including

1*Receiver module

1*Remote Control (with battery)