Lambda Oxygen O2 R For Suzuki Alto Carry Grand Vitara Jimny SX4 Swift Baleno Sidekick 18213-63J12

Warranty:Yes, 1 year warranty

Port Material:Plastic and Metal

Condition:In-stock, Brand-new, 100% test before send out

Features & Benefits:High accuracy, Hermetically sealed, Small size

Applications:

For Suzuki Alto 2004/09-2008/12 FF 1.1 1061 ccm, 46 KW, 63 PS

For Suzuki Carry Bus 1999/03-2006/12 -- 1.3 1298 ccm, 57 KW, 77 PS

For Suzuki Carry Kasten 2000/03-2021/12 FD 1.3 16V 1298 ccm, 58 KW, 79 PS

For Suzuki Grand Vitara I 1998/03-2003/07 FT, HT 1.6 4x4 1590 ccm, 69 KW, 94 PS

For Suzuki Grand Vitara I 2000/02-2002/09 FT, HT 1.6 4x4 1590 ccm, 73 KW, 99 PS

For Suzuki Grand Vitara I 1998/04-2005/08 FT, HT 2.0 4x4 1995 ccm, 103 KW, 140 PS

For Suzuki Grand Vitara I 1998/03-2003/07 FT, HT 2.0 4x4 1995 ccm, 94 KW, 128 PS

For Suzuki Grand Vitara I 1998/08-2000/12 FT, HT 2.0 4x4 1995 ccm, 97 KW, 132 PS

For Suzuki Grand Vitara I 2001/09-2003/07 FT, HT 2.7 4x4 2736 ccm, 127 KW, 173 PS

For Suzuki Grand Vitara Iandewagen Offen 1998/03-2003/07 GT 1.6 4x4 1590 ccm, 69 KW, 94 PS

For Suzuki Grand Vitara Iandewagen Offen 1998/03-2003/07 GT 2.0 4x4 1995 ccm, 94 KW, 128 PS

For Suzuki Jimnyandewagen Geschloen 1998/09-2000/08 FJ 1.3 4x4 1298 ccm, 63 KW, 86 PS

For Suzuki Jimnyandewagen Geschloen 2001/02-2021/12 FJ 1.3 16V 4WD 1328 ccm, 60 KW, 82 PS

For Suzuki Jimnyandewagen Geschloen 1998/09-2021/12 SN 1.3 16V 1298 ccm, 59 KW, 80 PS

For Suzuki Jimnyandewagen Geschloen 1998/09-2021/12 SN 1.3 16V 4WD 1298 ccm, 59 KW, 80 PS

For Suzuki Jimnyandewagen Geschloen 2005/08-2021/12 SN 1.3 16V 4x4 1328 ccm, 63 KW, 86 PS

For Suzuki SX4 2006/06-2010/07 EY, GY 1.5 1490 ccm, 73 KW, 99 PS

For Suzuki SX4 2010/07-2014/12 EY, GY 1.5 VVT 1490 ccm, 82 KW, 112 PS

For Suzuki SX4 2010/07-2021/12 EY, GY 1.5 VVT 4x4 1490 ccm, 82 KW, 112 PS

For Suzuki SX4 2009/07-2021/12 EY, GY 1.6 VVT 1586 ccm, 88 KW, 120 PS

For Suzuki SX4 2006/06-2021/12 EY, GY 1.6 VVT 1586 ccm, 79 KW, 107 PS

For Suzuki SX4 2009/07-2021/12 EY, GY 1.6 VVT 4x4 1586 ccm, 88 KW, 120 PS

For Suzuki SX4 2006/06-2021/12 EY, GY 1.6 VVT 4x4 1586 ccm, 79 KW, 107 PS

For Suzuki SX4 2009/07-2021/12 EY, GY 1.6 VVT 4x4 1586 ccm, 82 KW, 112 PS

For Suzuki SX4 Stufenheck 2007/10-2014/12 GY, RW 1.6 1586 ccm, 88 KW, 120 PS

For Suzuki SX4 Stufenheck 2007/10-2021/12 GY, RW 1.6 1586 ccm, 79 KW, 107 PS

For Suzuki Swift III 2005/02-2021/12 EZ, MZ 1.3 1328 ccm, 68 KW, 92 PS

For Suzuki Swift III 2006/01-2021/12 EZ, MZ 1.3 4x4 1328 ccm, 66 KW, 90 PS

For Suzuki Swift III 2005/02-2021/12 EZ, MZ 1.3 4x4 1328 ccm, 68 KW, 92 PS

For Suzuki Swift III 2005/02-2021/12 EZ, MZ 1.5 1490 ccm, 75 KW, 102 PS

For Suzuki Swift III 2005/02-2021/12 EZ, MZ 1.5 4x4 1490 ccm, 74 KW, 101 PS

For Suzuki Swift III 2006/05-2012/12 EZ, MZ 1.6 1586 ccm, 92 KW, 125 PS

Oxygen r's Location:

How do I know the O2 r is good or not?

Check engine light on

A reduction in fuel economy.

Your catalytic converter fails unexpectedly

Exhaust emiions reach undesirable levels.

How to install the oxygen r?

Step 1- Some rs are equipped with a heat shield that must be removed before the r removal, this is performed by removing any mounting bolts.

Step 2- By using a regular socket it minimizes potential damage to the r body and the threads, this technique helps avoid stripping the old r upon removal.

Step 3- Then, locate and disconnect the wiring connector, this step should be done before removing the r if the wiring is still attached.

Step 4- Its important that the wiring harne connectors are exactly the same, each r is unique to it's position and is located in the system by its connector configuration. (Note: some replacement rs have a universal electrical connector that must be configured to the wiring of the old r.)

Step 5- Use a small wire brush to help clean the threaded port to ensure a proper seal of the new r. Gently install the new oxygen r by hand while keeping the wiring and connector free from bends.

Step 6- Gently tighten the r while keeping wiring free from damage, these rs need to be fairly snug to avoid leakage.

Step 7- Once the r is tightened, reinstall any heat shields or bracing that had to be removed.

Step 8- After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harne. If the car has diagnostic trouble codes, they will need to be cleared.

We accept Credit Card, , WeChat Pay, PayPal, etc.

If you want to pay by PayPal, please contact us. Thanks!

All products will be tested strictly before shipping. Please make sure your addre in is matched with your shipping addre before you pay the order. And please make sure the mobile phone number and postcode is correct. In addition, Brazil and Chile customers please fill in the correct CPF number, so as to send your goods more quickly.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.