LCR-TC1 1.8" TFT LCD Display Multi-meter Transistor Tester Diode Triode Capacitor Resistor Test Meter ESR LCR NPN PNP MOSFET COD

LCR-TC1 1.8" TFT LCD Display Multi-meter Transistor Tester Diode Triode Capacitor Resistor Test Meter ESR LCR NPN PNP MOSFET COD

LCR-TC1 Described as follows：

Feature: For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight). After detection, align the infrared e control with the "IR" light, then pre the on in the e control, if the detector succefully decode it, it will display the data code and infrared wave form. Measurement results represent by TFT graphic display(160x128). Support Chinese and English. One key operation, Auto Power Off(Timeout Settable). Can also pre the multi-functional on to close the detector. Specification: Color: Size: 70*90*28mm/ 2.71x3.58x1.10 inch Display: 1.8 inch TFT Screen, Color Screen Diode Range: le than 4.5V Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V Triac Range: IGT le than 6mA Capacitance: 25pF-100mF(Please discharge capacitor before testing) Resistor: 0.01-50MΩ Inductance: 0.01mH-20H Power Voltage: 3.7V Power: Built-in Rechargeable Lithium Battery Package Included: 1 * Multi-functional TFT Transistor Tester 1 * Electronic Component Set 1 * Micro USB Cable 3 * Test Hook Operating Instructions Key operational definitions

Multi-function key has two actions:

Short pre: Pre the key and not le than 10 ms, release key within 1.5 seconds

Long pre: Pre the key more than 1.5 seconds

Power on

In the power off state, short pre the multifunction key, the tester is turned on and automatically measured.

Power on & measurement interface

Detect transistor

In the power off state or the test is completed, put the test into the transistor test area of test seat, and pre the locking handle, short pre the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete.

Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on!

Warning: We do not recommend using the tester to measure the battery! The battery voltage must be le than 4.5V, otherwise the tester may be damaged!

Component placement

Test seat are divided into transistors and zener diode test area, detailed in 1.1 Description.

No, unknown, or damaged part

TCR-T7 Described as follows：

160x128 TFT display Multi function key Transistor test area Zener Diode test area IR receiver window Micro USB Charging Interface Charge indicator LED Features: TC-V2.12k is a TFT graphic display Multifunction Tester. Transistor Tester Automatic detection of zener diode0.01-30V S test with automatic calibration IR decoder Support Hitachi IR IR waveform display Infrared receiving instruction Other: Measurement results using TFT graphic display(160x128) One key operation Auto Power Off(Timeout Settable) Built-in high capacity rechargeable Li-ion Battery Li-ion Battery voltage detection Support Chinese and English Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source! Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.