LCR-TC1 Multifunctional Transistor Tester Color Graphic Display

It can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, MOSFETs, IGBTs, JFETs, thyristors, etc.

Zener diodes can also be detected and have self-calibration capabilities.

Once detected, point the IR remote control at the "IR" light and press the button on the remote control. After the detector is decoded, the data code and infrared waveform will be displayed.

One button can automatically detect and shut down, or press the multi-function button to turn off the detector.

Place the pins of the component in the corresponding area, turn the small handle, and the detector will automatically detect it. The results will eventually be displayed on a backlit TFT screen.

Instead of the usual black and white display, this detector will display the results in color.

Feature:

Power Source: Rechargeable Lithium Battery

Display: 3.5 x 3 cm TFT screen.

Diode Range: < 4.5V

Zener Diode: Transistor Detection Area: 0.01-4.5V Zener Diode Detection Area: 0.01-30V

Triac Range: IGT