LINK1 Dual 30 Level Indicator VColorful Music AudioSpectrum Indicator Stereo Amplifier VU Meter with Remote Control

product description:

Model Name:COLORDB30Music level indicator

DC Input: ： 5V /1A

Power : 2.5W Max

Interface USB Power+Audio Input

Sensitivity dB Mode :-30dB ±10dB( 1KHZ)

Size:150X20MM

Operating  instructions：

Features：

1.30 group x2 independent colorful lights, Dual indication.

2.The rising speed and the falling speed of the light bar. the holding time and the falling speed of the peak can be adjusted separately.

3.Selectable monochromatic mode or color mode

4.The color of the light bar and the peak lamp can be chosen. (also divided into color mode and monochromatic mode ）

5.Under color mode, the color and number of colors of the can be selected (such as a closed loop with three colors of R, G, B, or a closed loop ·  with two colors of R.B).

6.dB mode and AGC mode selection，The AGC algorithm guarantees the best results when the amplitude of the input signal changes.

7.whether to open smooth effect.

8.whether to open background color (background color and brightne can be set separately).

9.The brightne of the lamp can be adjusted at different levels（When the brightne is too high, Please Don't look at it sight）.

Entertainment f effect.

Infrared remote function.

Specific operation：

I. Normal mode：

1.Single Click

POWER- Enter the standby status or wake-up.

UP- VU Meter Mode+.

DOWN- VU Meter Mode-.

LEFT- Change the color of the main light bar.

RIGHT- Change the color of the main light bar.

OK- The background light ON/OFF。

HOME- The smooth effect ON/OFF.

BACK- Return or exit the settings menu.

LIST-

DEC- Brightne reduction.

ADD- Brightne increase.

M-KEY- Switch monochrome mode / color mode I/ color mode II/ color mode III/ color mode IIII/ color mode V.

2．Long pre

POWER- Hold on 2 seconds to change the standby mode

OK- Hold on 2 seconds, switch dB mode or AGC mode

HOME- In color light mode, hold the on for 2 seconds to enter the custom settings menu.

BACK- Hold on 2 seconds infrared lock or unlock. (when infrared lock, as long as there is infrared on signal, the top has a red LED indication is locked).

LIST- Hold on 2 seconds to enter the setting menu.

LEFT- Continuous switching of the color of the main light bar。

RIGHT- Continuous switching of the color of the main light bar。

DEC- Long Pre on, Brightne reduction. Long pre after single click, the background brightne is reduced.。

ADD- Long Pre on, Brightne increase. Long pre after single click, the background brightne is increase.

3. Double-Click

BACK- Enter the s-checking mode.

UP- Background color switch mode, long click after double      click can continuous switch.

DOWN- Background color switch mode, long click after double click can continuous switch.

LEFT- Switch the color of the peak, long click after double click can continuous switch.

RIGHT- Switch the color of the peak, long click after double click can continuous switch.

M-KEY- Switching normal mode / fing effect I/ f effect II.(Please Don't look at it sight...)

4. Three-Click

UP /LEFT- Left lamp display can be turned upside down.

DOWN /RIGHT- Right lamp display can be turned upside down.

OK- Holistic image of color lamp.

5. Four-Click

OK- Switch normal mode / mirror effect I/ mirror effect II.

I. Speed Setting Mode（In normal mode hold LIST 2 seconds to enter, click BACK to exit）

OK / LIST-in

1.   The rising speed of the light bar (15 optional)

2.  The falling speed of the light bar (15 optional)

3. The holding time of the peak (15 optional)

4. The falling speed of the peak (15 optional)

5.  Fine-tuning the 0dB on dB mode.

Loop in these functions.

UP- Time increases, Speed decreases

DOWN- Time decreases, Speed increase.

BACK- exit the settings menu.

II. Custom （in color mode, click HOME key for 2 seconds to enter, click BACK on to exit）

OK-in

1.  Select the number of colors that e up the (all lights will f, click UP/DOWN can choose 1-6 colors

2.  Selection lamp（white light flicker indicating selected state, Click UP/DOWN can choose to adjust the color of which lamp）

3.  R flicker of the selected lamp (pre UP/DOWN can adjust the brightne of R)

4.  G flicker of the selected lamp (pre UP/DOWN can adjust the brightne of G)

5.  B flicker of the selected lamp (pre UP/DOWN can adjust the brightne of B)

Loop in these functions

UP- The number of lights increased/Which light to choose/The brightne of the R, G, B color lights is increased.

DOWN - The number of lights decreases/Which light to choose/The brightne of the R, G, B color lights is decreases.

BACK     - Exit the settings menu.

(Note：：In the color light mode, the first color of the default main light bar is the color that the user can build hims, and others are the color matching which is not changed)

III. Other Function ：

a.Factory Default

OK-10 Seconds

b. S-checking function

BACK- Double click the on to enter the s-check mode.  Single click to exit one exit.

UP- the previous step.

DOWN- The Next step.

Corresponding reference values for dB mode：

(Note: the brightne of the lamp is very high. Please pay attention to protecting your eyes and Please Don't look at it sight)..