This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificCommercial Door ProductsCommercial Door HardwareTrims, Seals & GasketsLithium For Drill Motor 18650 Cell Balance Li-ion 3S40A Auto Recovery 12.6V Battery Charger Balancer BMS Protection Board PCB 11.1V Protective 3S 40A More
/product/76/5125772/1.jpg?0262)
Share this product
Shipped from abroad
Lithium For Drill Motor 18650 Cell Balance Li-ion 3S40A Auto Recovery 12.6V Battery Charger Balancer BMS Protection Board PCB 11.1V Protective 3S 40A More
KSh 3,631
KSh 5,08629%
In stock
+ shipping from KSh 324 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 324
Ready for pickup between 05 June and 07 June if you place your order within the next 23hrs 2mins
Door Delivery
Delivery Fees KSh 414
Ready for delivery between 05 June and 07 June if you place your order within the next 23hrs 2mins
Return Policy
Easy Return, Quick Refund.Details
Seller Information
Hongfu
50%Seller Score
1 Followers
Seller Performance
Quality Score: Very Poor
Customer Rating: Excellent
Product details
Features
100% Brand new!
3 string 40A lithium battery protective board, comes with recovery function-auto recovery.
Equalization version(balanced version), applicable to electric drills with starting current below 80A, power below 170W.
Integrated 10 imported low internal resistance MOS tubes, continuous discharge 40A, 100mA equalizing current, suitable for electric drills, sprayers, LED lights, low power inverters, etc.
Ideal 3S 40A 3S40A li-ion lithium battery 18650 charger protection board BMS PCB 11.1V 12.6V cell charging protecting module with balance.
Specifications
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 20A
Size: About 41x60x3.4mm/1.6x2.4x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an balanced version BMS PCB(with equalized charging).
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, do not touch any components on the board while soldering the wire to avoid short circuit.
5. Do not mix good batteries with bad ones.
6. The closer the internal resistance of the three battery capacities is the better.
7. When charging the battery, the "430" resistor heat is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.
Package Included
1 x 3S 40A Protection Board
100% Brand new!
3 string 40A lithium battery protective board, comes with recovery function-auto recovery.
Equalization version(balanced version), applicable to electric drills with starting current below 80A, power below 170W.
Integrated 10 imported low internal resistance MOS tubes, continuous discharge 40A, 100mA equalizing current, suitable for electric drills, sprayers, LED lights, low power inverters, etc.
Ideal 3S 40A 3S40A li-ion lithium battery 18650 charger protection board BMS PCB 11.1V 12.6V cell charging protecting module with balance.
Specifications
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 20A
Size: About 41x60x3.4mm/1.6x2.4x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an balanced version BMS PCB(with equalized charging).
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, do not touch any components on the board while soldering the wire to avoid short circuit.
5. Do not mix good batteries with bad ones.
6. The closer the internal resistance of the three battery capacities is the better.
7. When charging the battery, the "430" resistor heat is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.
Package Included
1 x 3S 40A Protection Board
Specifications
Key Features
Features
100% Brand new!
3 string 40A lithium battery protective board, comes with recovery function-auto recovery.
Equalization version(balanced version), applicable to electric drills with starting current below 80A, power below 170W.
Integrated 10 imported low internal resistance MOS tubes, continuous discharge 40A, 100mA equalizing current, suitable for electric drills, sprayers, LED lights, low power inverters, etc.
Ideal 3S 40A 3S40A li-ion lithium battery 18650 charger protection board BMS PCB 11.1V 12.6V cell charging protecting module with balance.
Specifications
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 20A
Size: About 41x60x3.4mm/1.6x2.4x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an balanced version BMS PCB(with equalized charging).
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, do not touch any components on the board while soldering the wire to avoid short circuit.
5. Do not mix good batteries with bad ones.
6. The closer the internal resistance of the three battery capacities is the better.
7. When charging the battery, the "430" resistor heat is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.
Package Included
1 x 3S 40A Protection Board
100% Brand new!
3 string 40A lithium battery protective board, comes with recovery function-auto recovery.
Equalization version(balanced version), applicable to electric drills with starting current below 80A, power below 170W.
Integrated 10 imported low internal resistance MOS tubes, continuous discharge 40A, 100mA equalizing current, suitable for electric drills, sprayers, LED lights, low power inverters, etc.
Ideal 3S 40A 3S40A li-ion lithium battery 18650 charger protection board BMS PCB 11.1V 12.6V cell charging protecting module with balance.
Specifications
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 20A
Size: About 41x60x3.4mm/1.6x2.4x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an balanced version BMS PCB(with equalized charging).
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, do not touch any components on the board while soldering the wire to avoid short circuit.
5. Do not mix good batteries with bad ones.
6. The closer the internal resistance of the three battery capacities is the better.
7. When charging the battery, the "430" resistor heat is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.
Package Included
1 x 3S 40A Protection Board
What’s in the box
1*package
Specifications
- SKU: GE840IP4KMMGXNAFAMZ
- Model: avoid chenicals
- Production Country: China
- Size (L x W x H cm): 12 x 13 x 14 cm
- Weight (kg): 1
Customer Feedback
This product has no ratings yet.
/product/76/5125772/1.jpg?0262)
Lithium For Drill Motor 18650 Cell Balance Li-ion 3S40A Auto Recovery 12.6V Battery Charger Balancer BMS Protection Board PCB 11.1V Protective 3S 40A More
KSh 3,631
KSh 5,08629%
Questions about this product?