M.2 B+M KEY 8-Channel Single-Port 10GbE SFP Ethernet NIC Ne

Detailed Information About The Product:

Using for Intel 82599EN chip 10G network controller. Addresses the high requirements of next-generation data by delivering the flexibility of virtualization, the flexibility of LAN and SAN networks, and proven, reliable performance.
Driver supports for FreeBSD, Linux, VMWare ESXi, Win7 / Win-server2012 / Win-server2008 / Win8 / Win8.1 / Win-server2016 / win10
Supports Receive Side Scaling (RSS), supports IPv 4, IPv 6 protocols, supports jumbo frames up to 15.5K, supports checksum offloading
Interrupt throttling control to limit maximum interrupt rate and increase CPU usage
Application areas: Any mobile device, desktop, workstation, value server or industrial designed network equipment with strict space constraints.

Applicable network:M.2 10G industrial control server network card
Main controller:for Intel(R) JL82599EN
Bus type:M.2 B+M KEY
Media interface:1 x SFP+ fiber optic LC
Transmission rate:10GbE/1GbE
Network topology:IEEE 802.3: 10GBASE-SR (E10G41BFSR, E10G42BFSR), 10GBASE-LR (E10G41BFLR)
SFF-8431:10GSFP+Cu (a.k.a. Direct Attach)
X520 Adapters with SFP+ connections support 10GBASE-SR, 10GBASE-LR and SFP+ Copper Direct Attach physical media.
Management features:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Operating system:for FreeBSD, Linux, VMWare ESXi Win7/Win-server2012/Win-server2008/Win8/Win8.1/Win-server2016/win10
Working temperature:0℃-55℃(32℉-131℉)
Storage temperature:-40℃-70℃(-40℉-158℉)
Storage humidity:90% non-condensing relative humidity at 35℃
Colour:As Shown
Material:PCB

Package Contents:
1 * M.2B+MX520 Single Port SFP+ Industrial Network Card
1 * CD-Driver
1 * Flexible Network Cable (FPC)
1 * Short Iron Piece / 2U Small Chassis Applicable
1 * English instruction manual

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.