Micro B USB 3.0 Adapter Data Transfer Adaptador Type C Female To Micro B Male

Double AngledUSB 3.0 Micro-BMale To Type- C fe male FPV Flat Ribbon Cable Extension Data Aerial Photography Cord for GPS Navigator, ROCK Pi 4 Raspberry Pi SLR Handheld Pan/tilt

Brand name: ADT-LINK

Product name: USB 3.0 Type-cfemale to Micro-B maleflat cable

Product model: UTW23-FM-13P series

Transfer speed: USB 2.0/ USB3.0 Standard(Positive plug 3.0; Reverse plug 2.0/3.0)

Wire length: 3~300 cm, the length can be customized,

Current capacity: 1.5 within 50cm ; 0.9A within 1 meter Product application: GPS navigator, hard disk, Camera, ROCK Pi 4 Raspberry Pi MCU development board, built-in USB device to extend the use of adapter, convenient for brushle pan/tilt, USB power supply and camera video transmiion of handheld pan/tilt, etc. Note:This product is designed to be connected to built-in USB devices, and is not suitable for general external use. Does not support OTG external use.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Note 1: (Master) means connecting to the host port,such as motherboard; (slave) means connecting to devices such as U Disk, Card Reader, Hard Disk Case,etc

Note 2:Type-C interface T4B/T5B reverse insertion only has 2.0 speed, if you need high speed 3.0, please choose the version with T4A/T5A/T5T. Note 3: What is the difference between product model T4A/T5A/T5T and T4B/T5B? T4A/T5A/T5T with , supports USB3.1 positive and negative plug, both are 10G high speed T4B/T5B does not have a , and also supports positive and negative insertion. The positive insertion can support USB 3.1 high speed but the reverse insertion only supports USB 2.0 low speed

Product Image: Product real shot:

Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.