Multipurpose scissor Jack for lifting cars and heavy object

Using the 2‑ton OUSHIDA scissor jack is straightforward, but you need to follow the steps carefully to keep yourself and your vehicle safe. First, make sure you’re working on a flat, stable surface and engage the vehicle’s parking brake. Choose the correct lifting point on your car’s chassis (check your vehicle’s manual for the exact spot). Position the jack under the lifting point so the jack’s saddle fits snugly against the metal frame; this prevents slipping and damage.

Next, insert the jack handle into the operating socket on the side of the scissor mechanism. Turn the handle clockwise to begin raising the jack. As you pump, the scissor arms will extend and lift the load. Keep an eye on the jack’s alignment and the vehicle’s stability; stop lifting once the car reaches the desired height for your task, such as changing a tire or performing repairs. Never exceed the 2‑ton capacity marked on the jack.

When you’re ready to lower the vehicle, slowly turn the handle counterclockwise to release the hydraulic pressure inside the scissor mechanism. The arms will retract and the load will descend smoothly. Make sure the vehicle is stable on the ground before removing the jack completely. Always store the jack in a clean, dry place after use to prevent rust and maintain its performance.

For safety, never work under a vehicle supported only by a scissor jack; use additional jack stands to provide extra support. Inspect the jack before each use for any signs of damage, such as cracked arms or leaking fluid. If you notice any issues, replace the jack or have it serviced by a professional. Following these steps will ensure the jack serves you reliably for multiple uses and gives you remarkable performance as promised by the “OUSHIDA” bbra