Detailed Information About The Product:
NM-usb-chain is a NMMiner Lottery Board, with Wi-Fi, Bluetooth.
Deeply optimazion for ESP32-S3: Achieves high performance of 120kH/s with a single chip in solo miner mode, while maintaining low power consumption.
The NM-usb-chain is usb-A interface miner, multiple devices can form a BTC Lottery device chain.
The NM-usb-chain with a 0.96 inch TFT-LCD.
The NM-usb-chain can be configured with your phone or the NMMiner [official flash tool.]
Monitor its working status at any time through the [NMController]
Only one USB Power is enough for the all the ChainBot Devices.
The stronger the power supply of USB powered devices,the more ChainBot devices they can support.Actually,the 5V-3A USB Power,almost can supply power to 10 devices.
In the current mode, the device will measure the current of the USB interface.
Using a USBA-typeC data cable,it can be linked with other Lottery device.(data cable not included)
Specially optimized algorithm firmware enhances the arithmetic power to 120KH/s,increasing the probability of winning the lottery by 60%.
No External computer is needed.
The system supports SSL secure connection if the pool supports it.
By double-clicking the USER key,allows you to switch to a desktop clock mode with the BTC Lottery running in the background.
The NM-usb-chain can form a chain structure one by one,and only requires one power supply, making the overall design more concise.
Parameters:
Operating mode:BTC lottery/USB power meter tester
Hash Rate:110-120kH/s
Wi-Fi:802.11 b/g/n, up to 150Mbps
Device management:NM Controller
Power Interface:USB-A Male connector*1 USB-A Female connector*1
Intergrated Feature:WiFi 802.11b/g/n,BLE
Power supply range:5-20V
Power monitoring range:5-20V/0-6A
Colour:As Shown
Material:PCB+Plastic
Package Contents:
1 * BTC Lottery Board
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.