PCI-e 5.0 12VHPWR Extension Cable 30cm Extender Cord 16AWG GPU Cable Compatible for GeForce RTX 4070Ti, 4070,4080,4090

About this item

【Notice before shopping】To order a correct 16 pin extension cable for your PSU and GPU, we recommend you had better confirm the RTX 3090ti/ 4070/ 4070ti/ 4080/ 4090 GPU's requirement of the output wattage of PSU. We do recommend you use 0W-700W power supply to get a better and stable performance. If this cable is not suitable for your power supply or you are not sure what to choose, please feel at ease to connect with us. Don't plug and unplug by force.

【Designed for RTX 4070ti / 4070 / 3090ti / 4080 / 4090 GPU】Fasgear PCIe 5.0 16(12+4)pin male to 2*8(6+2)pin female sleeved extension GPU cable is designed for GeForce RTX 4070ti / 4070 / 3090ti / 4080 / 4090 GPU. That means, this cable can extend the length and work well with the power cable to get a stable and reliable performance. NOTE: Please choose 12+4pin to 3*8pin extension cable if use RTX 4070ti / 4070 / 3090ti / 4080 / 4090 GPU.

【Up to 600W Output】Fasgear PSU extension cable supports up to 600W output. The plug terminals of the graphics card cable are made of alloy copper and tinned material, which can bring stable and higher currents. NOTE: This extension cable requires 2 unoccupied 8-pin PCI-e ports on your power supply to properly function. Connecting fewer than two connectors to your power supply may cause system damage.

【Neat and Tidy】Fasgear 30cm 2*8(6+2)pin GPU riser extension cable, compared with the 10cm power cable, can make your DIY computer system neat and tidy. With 4 transparent cable comb acrylic clips, it is convenient for you to manage this sleeved extension cable cord. Thus, this extension cable can make the appearance of the computer system more beautiful.

【16AWG Tinned Copper Wire】Fasgear PCI-e 5.0 extension 12vhpwr cable contains 16AWG tinned copper wire. Compared with the standard 18AWG power cord, this updated 16AWG tinned copper wire can bring stable voltage transmiion and higher power output. Meanwhile, this tinned copper can prevent oxidation.

Notice Before Use

1. Fasgear 2*8pin(6+2) extension cable is mainly designed for those GPU which consume comparatively low power, like RTX 4070ti / 4070 / 3090ti / 4080 / 4090 GPU.

2. Recommend 0-700W PSU. If use 4070 Ti, the PSU is required at least 700W.

3. This extension cable should be used with PCIE/CPU 8-pin cable, and need 2 unoccupied 8pin ports on your PSU. Please see our pictures for the correct connecting way.

4. Please connect us if you have any questions before purchase. Likewise, also can connect us at any time after purchase.

UP to 600W Output

The plug terminals of the graphics card cable are made of alloy copper and tinned material,which can bring stable and higher currents.Make System Neat and TidyCompatibility

Geforce RTX 4070ti / 4070 / 3090ti / 4080 / 4090 GPU

With using PSU cable, it is compatible with any PSU as long as your PSU has enough output and use 2 unoccupied 8pin ports on your PSU.16AWG Tinned CopperDurable Nylon

red jacketSize InformationQuestions & Answers

Q1: Why our cable can carry a maximum of 600W power?

A1: Our cable uses High Conductivity Copper Terminals, which can carry current up to 10-12A. 16AWG copper wire can also carry 12A current. Theoretically, there are 3 power supply circuits within an 8pin. 10A*12V*3=360W, that means, a single 8pin can carry a maximum of 360W power. The amount of power output depends on the capacity of the power supply. In theory, a single 8pin port of the power supply can output about 300W.

Q2: Will it affect using when the cable has one empty pin?

A2: No, it is not affect using because the one empty is connected to the GND wire with the function of overcurrent protection.

Q3: What PSUs are compatible with it?

A3: It is compatible with for most modular power supplies, which requires 2 unoccupied 8pin PCIe/CPU ports at least. Compatible with ASUS, EVGA, Seasonic, Corsair, Thermal-take, Great Wall, NZXT, MSI, etc.