Share this product

Shipped from abroad

Portable Diamond Tester With Case Gemstone Platform

KSh 20,383

In stock

+ shipping from KSh 1,517 to CBD - UON/Globe/Koja/River Road

0 out of 5

(No ratings available)

Variation available

1 Set

Shipped from abroad

Delivery Fees KSh 1,517

Ready for pickup between 26 May and 28 May if you place your order within the next 13hrs 47mins

Delivery Fees KSh 1,627

Ready for delivery between 26 May and 28 May if you place your order within the next 13hrs 47mins

Easy Return, Quick Refund.Details

haixia

88%Seller Score

2 Followers

Shipping speed: Good

Quality Score: Excellent

Feature:
-Thermal conductivity tester is based on the thermal conductivity of diamonds designed and manufactured specifically for the identification of diamonds genuine and an electronic instrument.
-For precision electronic equipment, the use of the environment is 5-35 degrees Celsius, air relative humidity at 80%.
-The gem must be clean, dry and at room temperature.
-Pocket portable hand-held, non-destructive testing, easy to operate and accurate.
-Instructions for use:
1. Turn on the power, the power indicator light, the instrument warm up after the light can be used.
2. Adjust the three-color indicator light according to the weight of the measured diamonds and the temperature of the measuring point.
3. Remove the needle, hand-held instruments, the right hand index finger touched the instrument back cover of the conductive plate, so that the probe perpendicular to the diamond table to be tested, gently contact, so as to avoid needle damage.
4. Note that the instrument response, if the three-color light to the ninth or more than the ninth to the red diode light and beep, it is true diamonds, and vice versa is false diamonds.
Specifications:
Product : Diamond discriminator
Color: Black
Size: Approx. 13.5x4x2cm/5.31"x1.57"x0.78"
Power supply: 9V battery
Weight: 152g
Package Include:
1x Diamond discriminator
1x Battery
1x Storage bag
1x Test Bench
1x User Manual

Product : Diamond discriminator,Color: Black,Size: Approx. 13.5x4x2cm/5.31"x1.57"x0.78",Power supply: 9V battery,Weight: 152g
1. Turn on the power, the power indicator light, the instrument warm up after the light can be used.
2. Adjust the three-color indicator light according to the weight of the measured diamonds and the temperature of the measuring point.
3. Remove the needle, hand-held instruments, the right hand index finger touched the instrument back cover of the conductive plate, so that the probe perpendicular to the diamond table to be tested, gently contact, so as to avoid needle damage.
4. Note that the instrument response, if the three-color light to the ninth or more than the ninth to the red diode light and beep, it is true diamonds, and vice versa is false diamonds.