PowMr MPPT Solar Charge Controller 100A 12V 24V Dual USB

1. Industrial-grade master chip, 16 AD sampling accuracy, temperature, charging current,
discharge current accurate real-time display, power generation at a glance.
2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection
during charging, bidirectional focusing tracking.
3. Large-screen LCD display, adjustable charging and discharging parameters. UItra-wide charge
and discharge adjustable, as long as you understand the characteristics of the battery set its
corresponding charging parameters, you can charge a battery. When the output is off, the time
can be adjusted, which is more convenient. (on the market, there is no point adjustment)
4. Acomplete three-phase charge management, effectively protect the battery, the battery is more
durable.
5. Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection
protection,when the fault is eliminated, the controller automatically recovers, does not damage
the device.
6. Bidirectional MoS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
7. R5. 0 solar charging DC plug, R5. 0 DC lamp output DC plug, convenient connection.

• 1. Rated voltage: 12/24V
• 2. Rated current: 30/40/50/60/100A
• 3. Max. PV input power: 750W(12V) / 1200W(24V)
• 4.System voltage: 12 / 24V adaptive
• 5.Rated charging current: 30A - 40A - 50A- 60A - 100A
• 6.Rated discharge current: 10A - 20A - 20A - 30A - 30A
• 7.Solar photovoltaic voltage :12V battery with 18V solar panel, 24V battery with 36V solar panel
• 8.Full Voltage Value : Lithium Battery (12.2V) - B02 Colloidal Battery (14.2V) - B03 Open Cell (14.6V)
• 9.Floating Charge Voltage : 13.7 V ( Default, Adjustable )
• 10.Discharge cut-off voltage::10.7 V ( default, adjustable )
• 11.Discharge recovery voltage: 12.6 V ( default, adjustable )
• 12.Standby current :10mA
• 13.USB Output : 5V / 2A MAX
• 14.Operating temperature:- 35 - 60