HomeComputingComputer AccessoriesCables & InterconnectsPower CablesPWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T
product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-1product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-2product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-3product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-4product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-5product_image_name-Generic-PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T-6

Share this product

Shipped from abroad

PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T

KSh 544
KSh 1,08850%

2 units left

+ shipping from KSh 108 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees KSh 108
Ready for pickup between 09 July and 11 July if you place your order within the next 4hrs 40mins

Door Delivery

Delivery Fees KSh 198
Ready for delivery between 09 July and 11 July if you place your order within the next 4hrs 40mins

Return Policy

Easy Return, Quick Refund.Details

Warranty

None

Seller Information

spestram

66%Seller Score

14 Followers

Follow

Seller Performance

Shipping speed: Good

Quality Score: Very Poor

Customer Rating: Good

Product details

Detailed Information About The Product:

It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM. The modules are small in size and easy to use in different pla ces.
MCU embedded technology
Easy to operate fine tuned by potentiometer
Select the PWM signal input level range through short-circuit
The module is smaller easy to carry and use
Work Voltage:DC 12V-30V; Greater than 100MA
PWM Receiver Frequency:1KHZ-3KHZ
PWM signal input level range:
The peak of 4.5V to 10V level. The short cap install in '5V'. This level is used for normal controller or 5V MCU
The peak of 12V to 24V level so inserted in 24V. The short cap install in '24V'. This level is used for normal PLC controller
Conversion range:0%-100% PWM to 0-10V
Allowable error:5%
GND:Ground
GND:Negative of input signal
VOUT:Output Voltage 0-10V
GND:Output Voltage Ground
Operation instructions:
After power on without input signal the output is 0V so only input can output.
The first time when the power is on it is best to do a calibration debugging:Input a 50% duty ratio signal to PWM/GND and adjust the relative amplitude short cap. The frequency is 1KHZ-3KHZ Measured VOUT and GND with a multimeter and it will display 5V. Adjust potentiometer to make sure display 5.00V on multimeter. This will calibrate your pulse signal to this module.
When the frequency changes the correspondences may be offset and need to be re calibrated.
The output voltage can be adjusted by adjusting the duty ratio.
The accuracy can be controlled by adjusting the potentiometer.
colour:Blue + green
Material:PC+ metal
Package Contents:
1 * PWM to Voltage Converter Module
Only the above package content other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !

Specifications

Key Features

  • Durable and good quality
  • PWM to Voltage Converter Module
  • Voltage Converter Module
  • 0%-100% to 0-10V
  • for PLC MCU
  • Digital to Analog Signal
  • The details are as described above

What’s in the box

1 * PWM to Voltage Converter Module

Specifications

  • SKU: GE840EA5DR8YKNAFAMZ
  • Model: PWM to Voltage Converter Module
  • Production Country: China
  • Size (L x W x H cm): 6x5x2
  • Weight (kg): 0.021
  • Main Material: PC+ metal

Customer Feedback

This product has no ratings yet.

PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T

PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital T

KSh 544
KSh 1,08850%
Questions about this product?

Recently Viewed

See All