PZKHCT Split Base Current Transformer Coil Sensor For 1

Descriptions:

This is a mini split base current transformer; it's the smallest one compared to the similar products (output 100MA). Fully enclosed, good mechanical properties and environmental
resistance, strong voltage isolation capability, safety and reliability. Used for energy meter in special; AC 220v, 380v power supply can both be applied.

Features:

• 
  This is a mini split base current transformer; it's the smallest one compared to the similar products (output 100MA).
  
• 
  The diameter of inner hole is 16mm, the accuracy is ≤0.5 grade,
  
• 
  Using snap joint structure, it can be fixed to the cable directly through nylon ties.
  
• 
  Built-in input coil; small and light, easy to install.
  
• 
  Fully enclosed, good mechanical properties and environmental
  resistance, strong voltage isolation capability, safety and reliability.
  

Specifications:

Model: PZKHCT

Environment temperature: -40℃~+85℃

Relative humidity: ≤ 90%(40℃)

Working frequency: 50Hz~60Hz

Insulation endurance grade: B grade (130℃)

Insulation resistance: >1000MΩ normally

Dielectric strength: can afford power frequency 1000V/1minute

Flame resistance: Conform to UL94-Vo grade

Internal resistance: 10Ω 

Measuring range: 0-100A

Weight:59g



Application:

1. The current transformer is used for energy meter in special; AC 220v, 380v power supply can both be applied.

2. When you fix the energy meter, you don't need to cut off the power if you use this product.

Package Included:

1 x  Current Transformer



Note:

1. The CT primary should be connected in series with the test current loop, the secondary should be as work in the short-circuit state.

2. The secondary circuit is not allowed open circuit, so please do not install fuse.

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}