Raspberry Pi 4 / 4B Heat Sink (Compatible With POE Interface And Cooling Fan)

[Over View] This P165-B is an upgraded version of P165-A, which is perfectly compatible with POE Extension. This Embedded armor aluminum alloy heatsink/Radiator is design to slove Pi 4 exceive heat generation problem when use Raspberry Pi 4  with its expansion board.We found that most of the customer’s expansion boards require a copper pillar height of 11mm, so we designed this 11mm high heat sink. Compared with the old model, the heat diipation area is increased, and the heat diipation effect will be better; at the same time, It can compatible with the POE Module [Details]

Supports the installation of 30mm fan; Cooling fan can be added when the heat diipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat diipation problcan be solved.

Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU grease (not included) to get better heat diipation.

Only equipped with 4pcs M2.5X5+6mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.

Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board(also support PoE board); It is compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.

New version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, embedded heatsink with 11mm thickne.

The positioning hole comes with internal thread, which can be fixed in both directions

If the expansion board is against the radiator, please use 2*20 headers to increase the height

[]

Only supports Raspberry Pi 4 Model B;

Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board;

Equipped with only 4pcs M2.5x5+6mm spacers;

Raspberry Pi HAT positioning hole is M2.5 internal thread; (this design is convenient to fix)

Supports the installation of 30mm fans; Cooling fan can be added when the heat diipation of a single aluminum heat sink is not enough, so that all heat diipation problcan be solved.

Support POE expansion board, the POE port is available to use.

Heatsink size: 6.5x5.5x1.1cm/2.55x2.16x0.43inch

It is strongly recommend to use CPU silicone grease to get better heat diipation;

[WIKI]

raspberrypiwiki.com/P165

[Note]

The Raspberry Pi board is not included in the packing list.

Only compatible with Raspberry PI 4

Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU grease (not included) to get better heat diipation.

If you want to purchase P165-A, please refer to www.aliexpre.com/item/4000252442732.html [Packing List] Bundle 1

1* P165-B Heatsink

1* Screw Pack

Bundle 2

1* P165-B Heatsink

1* Screw Pack

1* Silicone Grease(About 1g ShinEtsu X-23-7921-5)

Bundle 3

1* P165-B Heatsink

1* Screw Pack

1* 30mm Fan

Bundle 4

1* P165-B Heatsink

1* Screw Pack

1* 30mm Fan

1* S ilicone Grease(About 1g ShinEtsu X-23-7921-5)

Application

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.