Raspberry Pi 4 Camera Night Vision Focal Adjustable 5 MP OV5647 Automatically

Raspberry Pi IRCUT Camera Night Vision Focal Adjustable 5MP OV5647 r Camera

Introduction :

The Raspberry Pi IR-CUT Camera is the day and night camera.

You can get the best imaging whatever it is in the daytime or at night.

It's a built-in IR-CUT camera, can be used during the day and night.

Automatically switch to night or night model :

When the camera at daytime will switch to day mode , the camera image is a normal color image, when the camera at night will switch to night mode , the camera can normally identify the infrared fill light of the light, which can be set through the software switch, to solve the other night vision camera during the day to take pictures of the image color is not normal.

Feature:

1. Raspberry Pi Camera, supports all revisions of the Raspberry Pi.

2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight

3. Comes with infrared LED, supports night vision

4. 5 megapixel OV5647 r

5. Camera specifications

6. CCD size: 1 / 4inch

7. Aperture (F): 1.8

8. Focal Length: 3.6mm adjustable

9. Field of View: 75.7 degree ( diagonal )

10. r best resolution: 1080p

11. 4 screw holes to fix the IR lights or holder.

12. Used for attachment

13. Provides 3.3V power output

14. Supports connecting infraredLED and / or fill flash LED

15. Dimension: 31 mm × 32 mm

Packing List :

Option 1:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 2:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 x 30 cm FFC

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 3:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 x 50 cm FFC

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 4:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 x 1m FFC

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 5:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 x 2m FFC

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 6:

1 x IR-Cut Camera1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 x 50 cm FFC1 x 50 cm FFC

1 x 30 cm FFC (for RPI Zero)

1 set x Screws and Nuts

( not include Raspberry Pi )

Option 7:

1 x IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 set x Screws and Nuts

1 x Acrylic Holder

2 x Heatsinks

( not include Raspberry Pi )

Using steps: 1.Please ensure the raspberry Pi system is the newer version, and open the camera function.Type the command: sudo ra- config and check the camera function of the fifth.The picture below:

2. Then select: Enable

3. Then the system return to the interface its. Choose the “Finish “ , it will restart:

4. After the raspberry pi system restart , you can use raspberry pi camera now.

If you want to take photo, you can run the command : raspistill

For example,input: raspistill –t 2000  -o 1.jpg -t: ( the time of waiting to take the photo ,5000 is five seconds). – o 1.jpg (1.jpg is command of file)

Tip:

Hardware connection: 1. Soft cable, 90-degree vertical connector, HDMI port to it. When connecting the contact side facing the HDMI interface. 2. Remove the before using the lens 3. bare boards, pay attention to ESD damage, guard against static electricity! Software: 1. RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade; 2. raspi-config, select the camera, start RPi firmware in the camera driver, then reboot 3. Use the command-line program raspivid and raspistill operating camera to capture video clips or images

4. The captured video clip needs to play with mplayer

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.