Raspberry Pi Zero 2 W / Zero W 18650 UPS & USB HUB Shield

Note:

Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB.

[Overview]

X306 is a one cell 18650 UPS shield designed for Raspberry Pi zero w / 2W.

It equipped with 3 standard USB-A 2.0 ports, and a USB Type C to power. The USB-A port can be used to connect external devices such as mouse, keyboard etc.

[Features]

Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W

Max 5.1V 4000mA Power Backup for even the most demanding Raspberry Pi set ups

18650 single cell battery holder

Upto 1000mA charging current

Integrated battery reverse polarity protection circuit

Integrated over current protection and over voltage protection

Intelligent automatic charging and discharging

4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%

Red & green LEDs show the status of power on/off and charging status

On-board push on to control power on /off (Pre-ON, Hold the on preed at least 3s -OFF)

Ultra-low standby power consumption of μA to maximize battery life

Integrated IN-to-SYS pa-through path to pa the input voltage to the system

Advanced system power path management avoids frequent charging and extend battery life

Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required

4-pin header for external power swtich and always-on power option

Equipped with three USB2.0 ports and one USB2.0 4-through-holes for more USB expansion

[Specification]

Input supply voltage: 5Vdc +/-5%

Input supply current: ≥3A

Charging current: 900~1050mA

Trickle charge current: 130~140mA

Predetermined Charge voltage: 4.2V +/-1.5%

Output voltage: 5.1V +/-5%

Max output current: 4000mA

[How to Power]

Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X306 NOT Pi zero 2W)

[How to Cool]

Aluminum Heatsink for raspberry pi zero 2 w, please refer to C296

[Packing List]

The Raspberry Pi board is not included in the packing list.

Kit-A:

1 x X306 18650 UPS Shield

4 x M2.5 x 5 Screws

Kit-B:

1 x X306 18650 UPS Shield

4 x M2.5 x 5 Screws

1 x USB Type-C Power Adapter (5V 4A 20W) - EU Plug

Kit-C:

1 x X306 18650 UPS Shield

4 x M2.5 x 5 Screws

1 x USB Type-C Power Adapter (5V 4A 20W) - US Plug

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.