Detailed Information About The Product:
Name:RFID ChameleonU Smart Chip Reader ISO14443 Key Detection EM125KHZ IC 13.56Mhz Badge Decode RFID Emulator
Working frequency:125KHZ /13.56MHZ
Battery:Lithium battery
Power on:Automatic start and stop.
Communication mode:TypeC/USB/Bluetooth
APP:Open source Nfc tool.
Decoding mode: Read card or Detect device.
Note:don't support clone card.
Already implemented:
1. Click the A button to switch the card slot to the right. If the card slot is not enabled, it will automatically skip and switch to the next one.
2. Click the B button to switch the card slot to the left, and other features are the same as above.
3. In the sleep state, press and hold the B button, insert the data cable, and then release the B button to enter the UPDATE mode.
Tip: When the color of the card slot is Red, the card slot is enabled with IC simulation + ID simulation at the same time.
When the color of the card slot is Green, the card slot only enables IC card simulation,
When the card slot color is Blue, only ID card simulation is enabled for this card slot.
Colour:As Shown
Material:Plastic
Package Contents:
1 x RFID ChameleonU Smart Chip Reader Kit(Due to different product batches, the appearance may vary but will not affect the use)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.