Security For RFID EM ID Card Access Control Reader 125K

Brief introduction:

It
is a 125KHz contactless access control reader, preclude the use of
advanced RF receiver circuit design and embedded micro-controller,
combined with efficient decoding algorithms. It has received high
sensitivity, current, single DC power supply, low price, high
performance characteristics. Dust, moisture, fully sealed design allows
users to install the outdoor and other harsh conditions, no mechanical
wear and durability.

Specifications:

Item Parameters

Operating Voltage :DC 8V-15V

Consumed Current :0-100mA

Support cards :TK4001\EM4100 etc.

Read Range :0mm-100mm(related to the card or the environment)

reader interval :＜0.5S

Format :Wiegand 26/Wiegand 34(Setting by oneself)

Distance of transmission :WG26/34≥100M

Service Temperature :-25℃ ~ +75℃

Size :28mm x 80mm x 12mm

Weight :About 60G

Lead Length :180mm±5mm

Material :PVC & Resin adhesive（it's waterproof）

Status Indication :2PC LED (Blue means standby, Green means reader success)

Line definition:

Red: VCC（8V-15V）

Black: GND

White: Wiegand D1

Green: Wiegand D0

Grey: Green light and buzzer long ring

Purple: Wiegand 26/Wiegand 34(The output format is WG34 when purple line connect with black line)

Notes:

1. Turn off the power and don't live operation when installing or disassembing

2.
The reader must be installed on wooden, concrete or brick wall, or
placed on the table. It may not have a large area of iron and steel
products within a radius of around 10 centimeters

3. Different cards has affect the distance of reader

4.
If the distance of reader between two machines