SENNESAI EW-135 G4 Professional Dual Wireless Microphne Stage Performance 2

135 G4 9000 description

FEATURES:

UHF band transmiion signal, the frequency range 635Mhz-695Mhz

Receiver and transmitter are equipped with LED display

The back of the receiver is equipped with 2 rubber antennas to enhance the received signal and highlight the appearance of high-grade

Contained one 6.3mm outputs and one balanced output, suitable for connecting a variety of external device

Microphone power consumption is 130mA, using 1.5V AA*2 battery power supply, can be used for more than 6 hour

Using distance: about 190ft-260ft

Audio and data use 32bit encryption transmiion and independent ID code, effectively prevent crotalk and interference

Transmitter and receiver use 8bit encryption infrared transmiion synchronization mode

The receiver can observe the battery working state of the transmitter with a glance

Use high fidelity moving coil microphone capsule, so that your voice is more clear and real

SPECIFICATIONS

System parameters: EW-135 G4

Audio frequency response: 80-17KHz

Dynamic range: ≥ 60dB

System distortion: ≤1%

Signal to noise ratio: ≥ 60dB

Ideal distance:190ft-260ft

Operating temperature range: 5 ℃ -4.5 ℃

RECEIVER

Receiver sensitivity: 40dB

To increase: 50μS

Audio output impedance: 600Ω

Audio output level: 0-0.5V

Use power: AC100-240V 50 / 60Hz

Power consumption: 3W

Volume: 240mm X 135mm X 42mm

TRANSMITTER

Frequency stability: ± 0.005%

Carrier output power: ≤ 30Mw

Spurious radiation suppreion:>40dB

Modulation: UHF

Maximum modulation: ± 75KHz

Pickup mode: moving coil

Use power: 1.5V

Battery power consumption: