SUNX21 MAX Nail lamp(3pin)

1.Set Up:Place The Lamp On A Flat Surface In A Well-Lit,Dry Area.Plug The Lamp Into An Electrical Socket,2.Prepare Your Nails:Ensure Your Nails Are Clean And Dry.Apply The Base Coat,Gel Polish,Or Nail Art Product As Desired,3.Turn On The Lamp:The Lamp Has An Automatic Sensor,So It Will Turn On When Your Hand Or Foot Is Placed Inside.If The Automatic Sensor Does Not Work,Press The Power Button To Turn The Lamp On Manually,4.Choose A Timer:The Lamp Includes 4 Timer Settings:30s,60s,90s,And 120s.Press The Corresponding Timer Button To Set The Desired Curing Time.For Standard Gel Polish,60 Seconds Or 90 Seconds Should Work Well.For Thicker Layers,You May Want To Use A Longer Time(E.G.,120 Seconds),5.Curing:Insert Your Hand Or Foot Into The Lamp,Ensuring Your Nails Are Positioned Directly Under The Light.The Lamp Will Automatically Shut Off When The Selected Timer Ends.Repeat Curing For Additional Layers Of Gel Polish As Needed,Depending On The Thickness,6.After Curing:Once Your Nails Are Fully Cured,Remove Your Hand Or Foot From The Lamp.Finish With A Top Coat If Needed And Apply Any Other Finishing Touches,7.Turn Off The Lamp:If You Used The Manual Power Button,Press It Again To Turn Off The Lamp.If Using The Sensor,Simply Remove Your Hand Or Foot From The Lamp,And It Will Turn Off Automatically.