T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution

T-Display-S3 Introduction

Introducing the latest addition to the T-Display series - the T-Display-S3. Equipped with the latest ESP32-S3 and Bluetooth 5.0, this model boasts a larger 1.9 inch screen and features an acrylic plate for added stability.

The T-Display-S3 maintains the sleek and modern design of the T-Display series.

There are MIDI expansion boards for use with the T-Display S3

Connect it to headphones or a stereo and playback the simulated sound!

Compatible with T-Display S3Basic VersionandTouch Version.

⚠️[Please note that the package does not include the T-Display S3 device, only the MIDI Board; please select the appropriate version of the S3 to use with the MIDI Board according to your needs].

T-Display S3-MIDI

More Information

hub

T-Display-S3 Touch Edition

From YouTube's "Useful Electronics" presentation:

Contribution from "У Павла!"

What engineers have done with T-Display-S3

Certification

"CE" "FCC" "TELEC(MIC)" "UKCA"

The board uses USB as the JTAG upload port. When printing serial port information on USB, CDC_ON_BOOT configuration needs to be turned on. If the port cannot be found when uploading the program or the USB has been used for other functions, the port does not appear. Please enter the upload mode manually.

Pre and hold the BOOT on when the power is off, the on is located behind the RST on.

When the USB is connected, first pre and hold the BOOT on, then click reset and then release the BOOT on

Please refer to the diagram for further instructions.Check

T-Display-S3 Specifications

MCU

ESP32-S3R8Dual-core LX7 microproceor

F

16MB

PSRAM

8MB

Wirele Connectivity

Wi-Fi802.11

Bluetooth5.0 + BT mesh

Prograng Platform

-ide、Micropython

Bat voltage

IO04

Onboard Functions

Boot+Reset+IO14 on

1.9 inch ST7789V IPS TFT LCD

Drive Chip

ST7789

Resolution

170(H) x 320(V)

Screen Size

1.9" Diagonal

Interface

8-Bit Parallel

Screen Type

TFT IPS LCD

Pixels Per Inch(PPI)

260

Screen Color

Full color

Color

White

Support USB/Li-Po Battery Dual Power Supply

T-Display-S3

No Pin

Pin

What's in the box?

1 X T-Display-S3

2 X 2.54mm Male Pin (1*12P)

1 X Power Cable 1.25mm 2P

T-Display-S3 With Shell

T-Display-S3 With Shell

Grey Shell

Black Shell

What's in the box?

1 X T-Display-S3 With Shell

2 X 2.54mm Female Pin (1*12P)

2 X 2.54mm Male Pin (1*12P)

1 X Power Cable 1.25mm 2P

T-Display-S3-MIDI Shield

T-Display-S3 Shield⚠ [Please note that the package does not include the T-Display S3 device, only the MIDI Board.]

Only MIDI Shield

Not include the T-Display S3

What's in the box?

1 X Shield

1 X 2.54mm Male Pin (1*16P)

2 X 2.54mm Male Pin (1*12P)

3 X 2.54mm Male Pin (1*3P)

1 X USB Type-C to USB Type-C