T300 Latest Version V16.8 Auto Key Programmer SBB Black Car Transponder

Product description:
(T300) Key Programmer V16.8
It is the latest version, which is V16.8, add more cars than old version. Use for key programming. More cars than any transponder machine.

Model:669313
Name: Latest Version V16.8 Auto Key Programmer Read/Clear Car Malfunction
Material: plastic
Size: Approx.23*11*9cm

Models coverage:
Acura, Audi, Alfa, Chevrolet, Citroen, Daewoo,Fiat, GM, Honda, Hyundai, Isuzu, Infiniti, , Kia, Land Rover, Lancia, Lexus, Lincoln, Mazda Japan, Mazda USA, Mercury, Mitsubishi, Nissan, Peugeot, Renault, Rover, Seat,
Skoda, Suzuki, Toyota Japan, Toyota USA ,Volkswagen and VW/Audi (Pin reading) .

NOTE:
This product can not do FORD and GM Holden. please pay attention.

Functions:
1. Read the vehicle malfunction
2. Clear the vehicle malfunction
3. Read IMM0/ECU ID
4. Reads the machinery key
5. Clear vehicle key memory
6. Program new key
7. Read EKA password
8. Programme new EKA password

Install Steps:
- VW Transponder key matching with 5 digits Login
- Procedure for adding transponder keys to vehicles with separate Immobilizer box:( 3, Passat B4, , Lupo, Sharan)
- Switch ignition ON with new key. Select: Immobilizer - Login
- Enter 5 numbers Login (add 0 if you have 4 digits Login ).
- For example, if your Login is 1234, enter 1234.
- Save
- Go to Adaptation
- Enter 01 in " Number"
- Enter
- The "Stored Value" is the number of keys currently matched.
- Enter number corresponding to the total number of keys to be matched, - for ex 2 ;
- Enter - Save
- Switch ignition off and remove key
- Insert key to ignition and switch ignition on again
- Wait 15 sec. Repeat this step with each key until all keys have been matched.
- Select: Immobilizer - Login. Enter Login . Go to Adaptation
- Enter 00 in " Number"
- Enter 0 and Save. This will learn ECU with Immobiliser.

NOTE:
The above is for installation reference ,No Instructions Included.Professional Installation Is Highly Recommended！

Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster: ( 2004, Passat B5, B6 )
- Switch ignition ON with new key. Select: Instrument - Login
- Enter 5 numbers Login (add 0 if you have 4 digits Login ).
- For example, if your Login is 1234, enter 01234.
- Save
- Go to Adaptation
- Enter 21 in " Number"
- Enter
- The "Stored Value" is the number of keys currently matched.
- Enter number corresponding to the total number of keys to be matched, - for ex 2 ;
- Enter - Save
- Switch ignition off and remove key
- Insert key to ignition and switch ignition on again
- Wait 15 sec. Repeat this step with each key until all keys have been matched.
- Select: Immobilizer - Login. Enter Login . Go to Adaptation
- Enter 00 in " Number"
- Enter 0 and Save. This will learn ECU with Immobiliser.

Package Included:
1x Main Unit
1x VAG 2x2 ADC-112
1x Nissan ADC -135[16 pin adpater]
1x Nissan ADC-136[14 pin adpater]
1x cable
1x OBD2 CABLES[16 pin adpater]
1x Honda ADC-141
1x Daewoo ADC-131
1x For Peugeot Adapter
1x For Nissan Adapter
1x For MITSUBISHI Adapter
1x For Honda Adapter
1x For Honda 3pin Adapter
1x For Suzuki Adapter
1x For Chrysler-1 Adapter
1x For Chrysler-2 Adapter
1x ADC-145 Adapter

Note:
-This product can not do FORD and GM Holden. please pay attention.
-The above is for installation reference ,No Instructions Included.Professional Installation Is Highly Recommended！









a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a