TPMS R FOR 2017-2022 Subaru XV OutbaAscent Impreza 433MHz Tire Pressure Monitoring System 28103FL000 28103FL00A

Selling Point

Note1:

Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not e sure which item fit for your car,please send the VIN CODE to us confirm it before order.

Note2:

【No r prograng Required】 : The Tire Preure r is 100% new and come pre-programmed specifically for your e/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : Scal tool RelearnInstallation of TPMS is recommended to be performed only by ined profeionals.

Application

For Subaru Ascent(from 2018-11 to 2024-10)For Subaru Forester(from 2018-10 to 2023-09)For Subaru Impreza(from 2017-01 to 2021-12)For Subaru Outback(from 2018-01 to 2019-08)For Subaru Wrx(from 2019-01 to 2021-03)For Subaru XV(from 2017-08 to 2022-07)

SPECIFICATION :Rep For Part Number:28103FL000/FL00A Battery Life: ABOUT 3 YEAROperating Frequency: 433MHzPACKAGE CONTENT : NORMAL PACKET

COMPREHENSIVE VEHICLE COVERAGE Installation Proce1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clorelative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the r: With a screwdriver remove the fastening screw and r from the Valve stem, then loosen the nut and remove the valve.4. Mount r and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the r body against the rim and tighten the screw.5. Mount the tire: P the tire on the rim, ing sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

FAQ

Q:【 Frequently of TPMS r】

A: 433mhz

Q: 【Did they tpms r need to e program】

A: The Tire Preure r come pre-programmed specifically for your e/model/year of vehicle,need activate them by sal tool or "re-learning".

Q:【 Relearn Procedure 】

A: II required