Type-C LCD Display Lithium Battery Capacity Tester MAh 18650 Internal

Product features:

The product supports single-channel capacity and internal resistance measurement

It supports separate charging and discharging, and supports up to 9 charging and discharging cycles in automatic mode

The stop discharge voltage is adjustable in 11 stops

The internal resistance can be switched between English and Chinese using DC two-wire method

The maximum charge-discharge current is about 1A

Note:

During the charging and discharging proce, some components will produce local high temperature. Please ensure that the use envment is open and not covered. If you can increase the heat diipation of the fan, it is better.

In order to ensure that the battery card clamp firmly, 18650 battery holder uses a compact battery holder, suitable for flat head battery measurement!!

Lithium ferric phosphate does not support charging

How to switch from English to Chinese:

Turn off and pre the menu key to turn on

Release the menu on, the English interface will be displayed at this time, and wait for 10 seconds for the system to save

After switching a data, we shut down and restart it, and then switch to English

We turn off and switch back to Chinese, pre and hold the menu key to turn on, release the menu key, wait for 10 seconds for the system to save automatically, and then turn off and turn on again. At this time, we complete the switch from English to Chinese.

We turn off and switch back to Chinese, pre and hold the menu key to turn on, release the menu key, wait for 10 seconds for the system to save automatically, and then turn off and turn on again. At this time, we complete the switch from English to Chinese.

Basic parameter：

Working power supply: DC5V power supply or 18650 battery (need to bring your own)

Applicable battery: meet the stop discharge voltage of 2.5-3.5V, 2.8V start to 4.2V full battery is applicable

Power supply interface: Type-C interface, power supply cable (mobile phone cable of port C)

Systemguage: Chinese (default), English

Test quantity: 1 circuit charging and discharging measurement (right side battery only)

Internal resistance measurement: Support, use DC two-wire method to test the internal resistance

Charging function: Support, automatically cut off charging when full (lithium phosphate battery charging is not supported)

Discharge function: Support, reach the condition automatically stop, discharge current is not adjustable

Automatic charging and discharging: Supported, the battery is fully charged at the end of automatic mode

Cycle charging and discharging: Supported, adjustable for 1~9 cycles (only supported in automatic mode)

Status prompt: Supported

Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, a total of 11 adjustable

Discharge current: two resistors, about 1A current at most. It cannot be adjusted and does not support independent transformation

Charging voltage: special battery charging control, the maximum charge is about 1A, full voltage 4.2V

Power-off save: Only the Settings are saved, not the metering data

Product weight: 80g (net weight) 120g (including packaging)

Product size: 110x88x30mm

Package size: 153x100x42mm

Data link: https://www.banber.com/gather/6365d57f9f8cae0007718211.html

Shipping list:

18650 Battery capacity Internal resistance detector X1

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.